Add Kiibohd bootloader type to bootloader.mk (#9908)0.9.51

11 files changed, 25 insertions, 71 deletions

diff --git a/bootloader.mk b/bootloader.mk
index e516e9ff9f..c22291e435 100644
--- a/bootloader.mk
+++ b/bootloader.mk
@@ -27,6 +27,7 @@
 # qmk-dfu        QMK DFU (LUFA + blinkenlight)
 # bootloadHID    HIDBootFlash compatible (ATmega32A)
 # USBasp         USBaspLoader (ATmega328P)
+# kiibohd        Input:Club Kiibohd bootloader (only used on their boards)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -89,6 +90,18 @@ ifeq ($(strip $(BOOTLOADER)), lufa-ms)
     BOOTLOADER_SIZE = 6144
     FIRMWARE_FORMAT = bin
 endif
+ifeq ($(strip $(BOOTLOADER)), kiibohd)
+    OPT_DEFS += -DBOOTLOADER_KIIBOHD
+    ifeq ($(strip $(MCU)), MK20DX128)
+        MCU_LDSCRIPT = MK20DX128BLDR4
+    endif
+    ifeq ($(strip $(MCU)), MK20DX256)
+        MCU_LDSCRIPT = MK20DX256BLDR8
+    endif
+
+    DFU_ARGS = -d 1C11:B007
+    DFU_SUFFIX_ARGS = -v 1C11 -p B007
+endif
 
 ifdef BOOTLOADER_SIZE
     OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
diff --git a/keyboards/ergodox_infinity/bootloader_defs.h b/keyboards/ergodox_infinity/bootloader_defs.h
deleted file mode 100644
index c67153be60..0000000000
--- a/keyboards/ergodox_infinity/bootloader_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/ergodox_infinity/rules.mk b/keyboards/ergodox_infinity/rules.mk
index 31bc20454c..572bda2a97 100644
--- a/keyboards/ergodox_infinity/rules.mk
+++ b/keyboards/ergodox_infinity/rules.mk
@@ -1,32 +1,18 @@
 # MCU name
 MCU = MK20DX256
 
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
 # Vector table for application
 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
 OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 
-BOOTLOADER = dfu
+# Bootloader selection
+BOOTLOADER = kiibohd
 
 # Build Options
 #   comment out to disable the options.
 #
 
-DFU_ARGS = -d 1c11:b007
-DFU_SUFFIX_ARGS = -p b007 -v 1c11
-
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration
 MOUSEKEY_ENABLE  = yes # Mouse keys
 EXTRAKEY_ENABLE  = yes # Audio control and System control
diff --git a/keyboards/infinity60/bootloader_defs.h b/keyboards/infinity60/bootloader_defs.h
deleted file mode 100644
index c67153be60..0000000000
--- a/keyboards/infinity60/bootloader_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk
index 579eab0f3f..8fb4b499ea 100644
--- a/keyboards/infinity60/rules.mk
+++ b/keyboards/infinity60/rules.mk
@@ -1,17 +1,6 @@
 # MCU name
 MCU = MK20DX128
 
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX128BLDR4
-
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # - BOARD =
@@ -26,15 +15,13 @@ BOARD = MCHCK_K20
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
 
-BOOTLOADER = dfu
+# Bootloader selection
+BOOTLOADER = kiibohd
 
 # Build Options
 #   comment out to disable the options.
 #
 
-DFU_ARGS = -d 1c11:b007
-DFU_SUFFIX_ARGS = -p b007 -v 1c11
-
 BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
 MOUSEKEY_ENABLE = yes	# Mouse keys
diff --git a/keyboards/k_type/bootloader_defs.h b/keyboards/k_type/bootloader_defs.h
deleted file mode 100644
index c67153be60..0000000000
--- a/keyboards/k_type/bootloader_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/k_type/rules.mk b/keyboards/k_type/rules.mk
index 56c4c606e3..176a28d868 100644
--- a/keyboards/k_type/rules.mk
+++ b/keyboards/k_type/rules.mk
@@ -1,28 +1,14 @@
 # MCU name
 MCU = MK20DX256
 
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # This board was copied from PJRC_TEENSY_3_1. The only difference should be a
 # hack to ensure the watchdog has started before trying to disable it.
 BOARD = IC_TEENSY_3_1
 
-DFU_ARGS = -d 1c11:b007
-DFU_SUFFIX_ARGS = -p b007 -v 1c11
-
-BOOTLOADER = dfu
+# Bootloader selection
+BOOTLOADER = kiibohd
 
 # Build Options
 #   comment out to disable the options.
diff --git a/keyboards/whitefox/bootloader_defs.h b/keyboards/whitefox/bootloader_defs.h
deleted file mode 100644
index c67153be60..0000000000
--- a/keyboards/whitefox/bootloader_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index 14507e9dd2..568b33b464 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -1,18 +1,6 @@
 # MCU name
 MCU = MK20DX256
 
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # - BOARD =
@@ -22,10 +10,8 @@ MCU_LDSCRIPT = MK20DX256BLDR8
 #   - MCHCK_K20 for Infinity KB
 BOARD = IC_TEENSY_3_1
 
-DFU_ARGS = -d 1c11:b007
-DFU_SUFFIX_ARGS = -p b007 -v 1c11
-
-BOOTLOADER = dfu
+# Bootloader selection
+BOOTLOADER = kiibohd
 
 # Build Options
 #   comment out to disable the options.
diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk
index 09aaddeef0..4c288646e2 100644
--- a/tmk_core/chibios.mk
+++ b/tmk_core/chibios.mk
@@ -324,7 +324,7 @@ bin: $(BUILD_DIR)/$(TARGET).bin sizeafter
 flash: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter
 ifneq ($(strip $(PROGRAM_CMD)),)
 	$(PROGRAM_CMD)
-else ifeq ($(strip $(BOOTLOADER)),dfu)
+else ifeq ($(strip $(BOOTLOADER)),kiibohd)
 	$(call EXEC_DFU_UTIL)
 else ifeq ($(strip $(MCU_FAMILY)),KINETIS)
 	$(call EXEC_TEENSY)
diff --git a/tmk_core/common/chibios/bootloader.c b/tmk_core/common/chibios/bootloader.c
index 4cf5dae7e6..6833511c0e 100644
--- a/tmk_core/common/chibios/bootloader.c
+++ b/tmk_core/common/chibios/bootloader.c
@@ -44,7 +44,7 @@ void enter_bootloader_mode_if_requested(void) {
 #elif defined(KL2x) || defined(K20x) /* STM32_BOOTLOADER_ADDRESS */
 /* Kinetis */
 
-#    if defined(KIIBOHD_BOOTLOADER)
+#    if defined(BOOTLOADER_KIIBOHD)
 /* Kiibohd Bootloader (MCHCK and Infinity KB) */
 #        define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000
 const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff";
@@ -54,14 +54,14 @@ void          bootloader_jump(void) {
     SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk;
 }
 
-#    else /* defined(KIIBOHD_BOOTLOADER) */
+#    else /* defined(BOOTLOADER_KIIBOHD) */
 /* Default for Kinetis - expecting an ARM Teensy */
 #        include "wait.h"
 void bootloader_jump(void) {
     wait_ms(100);
     __BKPT(0);
 }
-#    endif /* defined(KIIBOHD_BOOTLOADER) */
+#    endif /* defined(BOOTLOADER_KIIBOHD) */
 
 #else /* neither STM32 nor KINETIS */
 __attribute__((weak)) void bootloader_jump(void) {}