diff options
| author | Joel Challis <git@zvecr.com> | 2019-08-23 00:08:45 +0100 |
|---|---|---|
| committer | Drashna Jaelre <drashna@live.com> | 2019-08-22 16:08:45 -0700 |
| commit | ae44ec9820cdf5348e802c9bae3af34557617685 (patch) | |
| tree | 1c0e98156fa2df209290f295ff000264a1852df1 | |
| parent | 1c805b3d008a98a5a15112b0655ba14b42dbae67 (diff) | |
Align flashing behaviour of dfu-util (#6578)0.6.457
* Align flashing retry logic of dfu-util
* Align bootloader wait messages
Co-Authored-By: Drashna Jaelre <drashna@live.com>
| -rw-r--r-- | docs/flashing.md | 6 | ||||
| -rw-r--r-- | tmk_core/chibios.mk | 22 |
2 files changed, 8 insertions, 20 deletions
diff --git a/docs/flashing.md b/docs/flashing.md index 833b9dd629..d11dbdf15b 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -171,7 +171,5 @@ Flashing sequence: There are a number of DFU commands that you can use to flash firmware to a STM32 device: -* `:dfu-util` - The default command for flashing to STM32 devices. -* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware. You can use `TIME_DELAY=20` from the command line to change the timeout. - * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5` -* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. +* `:dfu-util` - The default command for flashing to STM32 devices. +* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index eee520467d..4b5b6d00b5 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -235,28 +235,18 @@ qmk: $(BUILD_DIR)/$(TARGET).bin printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk define EXEC_DFU_UTIL + until $(DFU_UTIL) -l | grep -q "Found DFU"; do\ + echo "Error: Bootloader not found. Trying again in 5s." ;\ + sleep 5 ;\ + done $(DFU_UTIL) $(DFU_ARGS) -D $(BUILD_DIR)/$(TARGET).bin endef dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter $(call EXEC_DFU_UTIL) -ifneq ($(strip $(TIME_DELAY)),) - TIME_DELAY = $(strip $(TIME_DELAY)) -else - TIME_DELAY = 10 -endif -dfu-util-wait: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter - echo "Preparing to flash firmware. Please enter bootloader now..." ;\ - COUNTDOWN=$(TIME_DELAY) ;\ - while [[ $$COUNTDOWN -ge 1 ]] ; do \ - echo "Flashing in $$COUNTDOWN ..."; \ - sleep 1 ;\ - ((COUNTDOWN = COUNTDOWN - 1)) ; \ - done; \ - echo "Flashing $(TARGET).bin" ;\ - sleep 1 ;\ - $(call EXEC_DFU_UTIL) +# Legacy alias +dfu-util-wait: dfu-util st-link-cli: $(BUILD_DIR)/$(TARGET).hex sizeafter $(ST_LINK_CLI) $(ST_LINK_ARGS) -q -c SWD -p $(BUILD_DIR)/$(TARGET).hex -Rst |