DC01 keyboard addition (#3428)0.6.73

* DC01 initial commit

- Addition of directories
- Left readme

* Initial commit of left half

* Initial files for right half

* arrow

* i2c adjustments

* I2C slave and DC01 refractoring

- Cleaned up state machine of I2C slave driver
- Modified DC01 left to use already pressent I2C master driver
- Modified DC01 matrixes

* Fixed tabs to spaces

* Addition of Numpad

* Add keymaps

- Orthopad keymap for numpad module
- Numpad keymap for numpad module
- ISO, ANSI and HHKB version of keymap for right module

* Minor matrix.c fixes

* Update Readmes

50 files changed, 3747 insertions, 142 deletions

diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c
index 4e76e2e7c6..47c6f8e6c6 100755
--- a/drivers/avr/i2c_master.c
+++ b/drivers/avr/i2c_master.c
@@ -15,15 +15,15 @@
 void i2c_init(void)
 {
   TWSR = 0;     /* no prescaler */
-	TWBR = (uint8_t)TWBR_val;
+  TWBR = (uint8_t)TWBR_val;
 }
 
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
 {
-	// reset TWI control register
-	TWCR = 0;
-	// transmit START condition
-	TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+  // reset TWI control register
+  TWCR = 0;
+  // transmit START condition
+  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -32,13 +32,13 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
     }
   }
 
-	// check if the start condition was successfully transmitted
-	if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
+  // check if the start condition was successfully transmitted
+  if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
 
-	// load slave address into data register
-	TWDR = address;
-	// start transmission of address
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  // load slave address into data register
+  TWDR = address;
+  // start transmission of address
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -47,19 +47,19 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
     }
   }
 
-	// check if the device has acknowledged the READ / WRITE mode
-	uint8_t twst = TW_STATUS & 0xF8;
-	if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
+  // check if the device has acknowledged the READ / WRITE mode
+  uint8_t twst = TW_STATUS & 0xF8;
+  if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
 {
-	// load data into data register
-	TWDR = data;
-	// start transmission of data
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  // load data into data register
+  TWDR = data;
+  // start transmission of data
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -68,16 +68,16 @@ i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
     }
   }
 
-	if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
+  if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 int16_t i2c_read_ack(uint16_t timeout)
 {
 
-	// start TWI module and acknowledge data after reception
-	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
+  // start TWI module and acknowledge data after reception
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -86,15 +86,15 @@ int16_t i2c_read_ack(uint16_t timeout)
     }
   }
 
-	// return received data from TWDR
-	return TWDR;
+  // return received data from TWDR
+  return TWDR;
 }
 
 int16_t i2c_read_nack(uint16_t timeout)
 {
 
-	// start receiving without acknowledging reception
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  // start receiving without acknowledging reception
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -103,39 +103,39 @@ int16_t i2c_read_nack(uint16_t timeout)
     }
   }
 
-	// return received data from TWDR
-	return TWDR;
+  // return received data from TWDR
+  return TWDR;
 }
 
 i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	for (uint16_t i = 0; i < length; i++) {
-		status = i2c_write(data[i], timeout);
+  for (uint16_t i = 0; i < length; i++) {
+    status = i2c_write(data[i], timeout);
     if (status) return status;
-	}
+  }
 
-	status = i2c_stop(timeout);
+  status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(address | I2C_READ, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	for (uint16_t i = 0; i < (length-1); i++) {
+  for (uint16_t i = 0; i < (length-1); i++) {
     status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
     } else {
       return status;
     }
-	}
+  }
 
   status = i2c_read_nack(timeout);
   if (status >= 0 ) {
@@ -147,47 +147,47 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16
   status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	status = i2c_write(regaddr, timeout);
+  status = i2c_write(regaddr, timeout);
   if (status) return status;
 
-	for (uint16_t i = 0; i < length; i++) {
+  for (uint16_t i = 0; i < length; i++) {
     status = i2c_write(data[i], timeout);
-		if (status) return status;
-	}
+    if (status) return status;
+  }
 
-	status = i2c_stop(timeout);
+  status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(devaddr, timeout);
-	if (status) return status;
+  if (status) return status;
 
   status = i2c_write(regaddr, timeout);
   if (status) return status;
 
   status = i2c_start(devaddr | 0x01, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	for (uint16_t i = 0; i < (length-1); i++) {
-		status = i2c_read_ack(timeout);
+  for (uint16_t i = 0; i < (length-1); i++) {
+    status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
     } else {
       return status;
     }
-	}
+  }
 
   status = i2c_read_nack(timeout);
   if (status >= 0 ) {
@@ -199,13 +199,13 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16
   status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_stop(uint16_t timeout)
 {
-	// transmit STOP condition
-	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+  // transmit STOP condition
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
 
   uint16_t timeout_timer = timer_read();
   while(TWCR & (1<<TWSTO)) {
@@ -215,4 +215,4 @@ i2c_status_t i2c_stop(uint16_t timeout)
   }
 
   return I2C_STATUS_SUCCESS;
-}
+}
\ No newline at end of file
diff --git a/drivers/avr/i2c_master.h b/drivers/avr/i2c_master.h
index cf93680be4..89c64599c5 100755
--- a/drivers/avr/i2c_master.h
+++ b/drivers/avr/i2c_master.h
@@ -28,4 +28,4 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint1
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_stop(uint16_t timeout);
 
-#endif // I2C_MASTER_H
+#endif // I2C_MASTER_H
\ No newline at end of file
diff --git a/drivers/avr/i2c_slave.c b/drivers/avr/i2c_slave.c
index 3edf85b12b..27696ca01a 100755
--- a/drivers/avr/i2c_slave.c
+++ b/drivers/avr/i2c_slave.c
@@ -5,96 +5,64 @@
 #include <avr/io.h>
 #include <util/twi.h>
 #include <avr/interrupt.h>
+#include <stdbool.h>
 
 #include "i2c_slave.h"
 
 void i2c_init(uint8_t address){
-	// load address into TWI address register
-	TWAR = (address << 1);
-	// set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
-	TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+    // load address into TWI address register
+    TWAR = (address << 1);
+    // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
+    TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
 void i2c_stop(void){
-	// clear acknowledge and enable bits
-	TWCR &= ~( (1<<TWEA) | (1<<TWEN) );
+    // clear acknowledge and enable bits
+    TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
 ISR(TWI_vect){
-	
-	// temporary stores the received data
-	uint8_t data;
-	
-	// own address has been acknowledged
-	if( (TWSR & 0xF8) == TW_SR_SLA_ACK ){  
-		buffer_address = 0xFF;
-		// clear TWI interrupt flag, prepare to receive next byte and acknowledge
-		TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-	}
-	else if( (TWSR & 0xF8) == TW_SR_DATA_ACK ){ // data has been received in slave receiver mode
-		
-		// save the received byte inside data 
-		data = TWDR;
-		
-		// check wether an address has already been transmitted or not
-		if(buffer_address == 0xFF){
-			
-			buffer_address = data; 
-			
-			// clear TWI interrupt flag, prepare to receive next byte and acknowledge
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-		}
-		else{ // if a databyte has already been received
-			
-			// store the data at the current address
-			rxbuffer[buffer_address] = data;
-			
-			// increment the buffer address
-			buffer_address++;
-			
-			// if there is still enough space inside the buffer
-			if(buffer_address < 0xFF){
-				// clear TWI interrupt flag, prepare to receive next byte and acknowledge
-				TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-			}
-			else{
-				// Don't acknowledge
-				TWCR &= ~(1<<TWEA); 
-				// clear TWI interrupt flag, prepare to receive last byte.
-				TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEN); 
-			}
-		}
-	}
-	else if( (TWSR & 0xF8) == TW_ST_DATA_ACK ){ // device has been addressed to be a transmitter
-		
-		// copy data from TWDR to the temporary memory
-		data = TWDR;
-		
-		// if no buffer read address has been sent yet
-		if( buffer_address == 0xFF ){
-			buffer_address = data;
-		}
-		
-		// copy the specified buffer address into the TWDR register for transmission
-		TWDR = txbuffer[buffer_address];
-		// increment buffer read address
-		buffer_address++;
-		
-		// if there is another buffer address that can be sent
-		if(buffer_address < 0xFF){
-			// clear TWI interrupt flag, prepare to send next byte and receive acknowledge
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-		}
-		else{
-			// Don't acknowledge
-			TWCR &= ~(1<<TWEA); 
-			// clear TWI interrupt flag, prepare to receive last byte.
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEN); 
-		}
-		
-	}
-	else{
-		// if none of the above apply prepare TWI to be addressed again
-		TWCR |= (1<<TWIE) | (1<<TWEA) | (1<<TWEN);
-	} 
-}
+    uint8_t ack = 1;
+    // temporary stores the received data
+    //uint8_t data;
+    
+    switch(TW_STATUS){
+        case TW_SR_SLA_ACK:
+            // The device is now a slave receiver
+            slave_has_register_set = false;
+            break;
+
+        case TW_SR_DATA_ACK:
+            // This device is a slave receiver and has received data
+            // First byte is the location then the bytes will be writen in buffer with auto-incriment
+            if(!slave_has_register_set){
+                buffer_address = TWDR;
+
+                if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
+                    ack = 0;
+                    buffer_address = 0;
+                }
+                slave_has_register_set = true; // address has been receaved now fill in buffer
+            } else {
+                rxbuffer[buffer_address] = TWDR;
+                buffer_address++;
+            }
+            break;
+
+        case TW_ST_SLA_ACK:
+        case TW_ST_DATA_ACK:
+            // This device is a slave transmitter and master has requested data
+            TWDR = txbuffer[buffer_address];
+            buffer_address++;
+            break;
+
+        case TW_BUS_ERROR:
+            // We got an error, reset i2c
+            TWCR = 0;
+        default:
+            break;
+    }
+
+    // Reset i2c state mahcine to be ready for next interrupt
+    TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
+}
\ No newline at end of file
diff --git a/drivers/avr/i2c_slave.h b/drivers/avr/i2c_slave.h
index 3fda7f8c09..1c3b9ecc00 100755
--- a/drivers/avr/i2c_slave.h
+++ b/drivers/avr/i2c_slave.h
@@ -8,12 +8,16 @@
 #ifndef I2C_SLAVE_H
 #define I2C_SLAVE_H
 
+#define TX_BUFFER_SIZE 30
+#define RX_BUFFER_SIZE 30
+
 volatile uint8_t buffer_address;
-volatile uint8_t txbuffer[0xFF];
-volatile uint8_t rxbuffer[0xFF];
+static volatile bool slave_has_register_set = false;
+volatile uint8_t txbuffer[TX_BUFFER_SIZE];
+volatile uint8_t rxbuffer[RX_BUFFER_SIZE];
 
 void i2c_init(uint8_t address);
 void i2c_stop(void);
 ISR(TWI_vect);
 
-#endif // I2C_SLAVE_H
+#endif // I2C_SLAVE_H
\ No newline at end of file
diff --git a/keyboards/dc01/arrow/arrow.c b/keyboards/dc01/arrow/arrow.c
new file mode 100644
index 0000000000..07988b8099
--- /dev/null
+++ b/keyboards/dc01/arrow/arrow.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "arrow.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/dc01/arrow/arrow.h b/keyboards/dc01/arrow/arrow.h
new file mode 100644
index 0000000000..b7fec9ee84
--- /dev/null
+++ b/keyboards/dc01/arrow/arrow.h
@@ -0,0 +1,41 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef ARROW_H
+#define ARROW_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_ALL( \
+    K00, K01, K02, \
+    K10, K11, K12, \
+                   \
+         K31,      \
+    K40, K41, K42  \
+) \
+{ \
+    { K00, K01, K02 }, \
+    { K10, K11, K12 }, \
+    { XXX, XXX, XXX }, \
+    { XXX, K31, XXX }, \
+    { K40, K41, K42 }  \
+}
+
+#endif
diff --git a/keyboards/dc01/arrow/config.h b/keyboards/dc01/arrow/config.h
new file mode 100644
index 0000000000..75c674f631
--- /dev/null
+++ b/keyboards/dc01/arrow/config.h
@@ -0,0 +1,151 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1012
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Arrow
+#define DESCRIPTION     Arrow cluster of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, C7, C6, B6, B4 }
+#define MATRIX_COL_PINS { F0, B7, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
\ No newline at end of file
diff --git a/keyboards/dc01/arrow/info.json b/keyboards/dc01/arrow/info.json
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/dc01/arrow/info.json
diff --git a/keyboards/dc01/arrow/keymaps/default/keymap.c b/keyboards/dc01/arrow/keymaps/default/keymap.c
new file mode 100644
index 0000000000..591deb01c8
--- /dev/null
+++ b/keyboards/dc01/arrow/keymaps/default/keymap.c
@@ -0,0 +1,42 @@
+/* Copyright 2018 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ALL( /* Base */
+    KC_INS,  KC_HOME,  KC_PGUP, \
+    KC_DEL,  KC_END,   KC_PGDN, \
+                                \
+             KC_UP,             \
+    KC_LEFT, KC_DOWN,  KC_RIGHT \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/dc01/arrow/keymaps/default/readme.md b/keyboards/dc01/arrow/keymaps/default/readme.md
new file mode 100644
index 0000000000..bc2431bc15
--- /dev/null
+++ b/keyboards/dc01/arrow/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default ANSI keymap for DC01 Arrow cluster
+
+When using the arrow module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.
\ No newline at end of file
diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c
new file mode 100644
index 0000000000..68abb6791a
--- /dev/null
+++ b/keyboards/dc01/arrow/matrix.c
@@ -0,0 +1,404 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_slave.h"
+#include "lufa.h"
+
+#define SLAVE_I2C_ADDRESS 0x23
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+        if (USB_DeviceState != DEVICE_STATE_Configured){
+            txbuffer[1] = 0x55;
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++){
+                txbuffer[i+2] = matrix[i]; //send matrix over i2c
+            }
+        }
+    
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+//this replases tmk code
+void matrix_setup(void){
+    
+    if (USB_DeviceState != DEVICE_STATE_Configured){
+        i2c_init(SLAVE_I2C_ADDRESS); //setup address of slave i2c
+        sei(); //enable interupts
+    }
+}
\ No newline at end of file
diff --git a/keyboards/dc01/arrow/readme.md b/keyboards/dc01/arrow/readme.md
new file mode 100644
index 0000000000..3c0ece7a31
--- /dev/null
+++ b/keyboards/dc01/arrow/readme.md
@@ -0,0 +1,15 @@
+# DC01 Arrow Cluster
+
+![DC01 Arrow Cluster](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the arrow cluster
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/arrow:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/dc01/arrow/rules.mk b/keyboards/dc01/arrow/rules.mk
new file mode 100644
index 0000000000..c457893536
--- /dev/null
+++ b/keyboards/dc01/arrow/rules.mk
@@ -0,0 +1,74 @@
+SRC += matrix.c \
+       ../../../drivers/avr/i2c_slave.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
+CUSTOM_MATRIX = yes         # Use custom matrix
\ No newline at end of file
diff --git a/keyboards/dc01/left/config.h b/keyboards/dc01/left/config.h
new file mode 100644
index 0000000000..68484d8355
--- /dev/null
+++ b/keyboards/dc01/left/config.h
@@ -0,0 +1,152 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1010
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Left
+#define DESCRIPTION     Left half of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 21
+#define MATRIX_COLS_SCANNED 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6 }
+#define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
\ No newline at end of file
diff --git a/keyboards/dc01/left/i2c.c b/keyboards/dc01/left/i2c.c
new file mode 100644
index 0000000000..c72789403e
--- /dev/null
+++ b/keyboards/dc01/left/i2c.c
@@ -0,0 +1,159 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
diff --git a/keyboards/dc01/left/i2c.h b/keyboards/dc01/left/i2c.h
new file mode 100644
index 0000000000..25e876658b
--- /dev/null
+++ b/keyboards/dc01/left/i2c.h
@@ -0,0 +1,31 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+#endif
diff --git a/keyboards/dc01/left/info.json b/keyboards/dc01/left/info.json
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/dc01/left/info.json
diff --git a/keyboards/dc01/left/keymaps/default/keymap.c b/keyboards/dc01/left/keymaps/default/keymap.c
new file mode 100644
index 0000000000..07db66c8e9
--- /dev/null
+++ b/keyboards/dc01/left/keymaps/default/keymap.c
@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ANSI( /* Base */
+  KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5, KC_6,       KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,    KC_INS,  KC_HOME,  KC_PGUP,    KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,  \
+  KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,       KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,    KC_DEL,  KC_END,   KC_PGDN,    KC_P7,    KC_P8,    KC_P9,    KC_PPLS,  \
+  KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,       KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,                                    KC_P4,    KC_P5,    KC_P6,    KC_NO,    \
+  KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,                   KC_RSFT,             KC_UP,                KC_P1,    KC_P2,    KC_P3,              \
+  KC_LCTL,   KC_LGUI,  KC_LALT,  KC_SPC,                 KC_SPC,    KC_SPC,    KC_RALT,    KC_RGUI,     KC_RGUI, KC_RCTL,    KC_LEFT, KC_DOWN,  KC_RIGHT,   KC_P0,    KC_NO,    KC_PDOT,  KC_PENT   \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/dc01/left/keymaps/default/readme.md b/keyboards/dc01/left/keymaps/default/readme.md
new file mode 100644
index 0000000000..36207e5117
--- /dev/null
+++ b/keyboards/dc01/left/keymaps/default/readme.md
@@ -0,0 +1,9 @@
+# The default ANSI keymap for DC01 Left
+
+The keymap looks like a full layout keymap.
+
+This is because the left part of the keyboard acts as the masterm coordinating all four part.
+
+When using the keyboard to connect the other three parts, this keymap overwrites the individual keymaps of the single modules.
+
+When using a module individually, the keymap of that module will take effect.
diff --git a/keyboards/dc01/left/left.c b/keyboards/dc01/left/left.c
new file mode 100644
index 0000000000..1d8da186bd
--- /dev/null
+++ b/keyboards/dc01/left/left.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "left.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/dc01/left/left.h b/keyboards/dc01/left/left.h
new file mode 100644
index 0000000000..82b0c69951
--- /dev/null
+++ b/keyboards/dc01/left/left.h
@@ -0,0 +1,41 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef LEFT_H
+#define LEFT_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_ANSI( \
+    K00, K01, K02, K03, K04, K05, K45,        K07, K08, K09, K0A, K0B, K0C, K0D,   K0E, K0F, K0G,   K0H, K0J, K0K, K0L, \
+    K10, K11, K12, K13, K14, K15,        K16, K17, K18, K19, K1A, K1B, K1C, K1D,   K1E, K1F, K1G,   K1H, K1J, K1K, K1L, \
+    K20, K21, K22, K23, K24, K25,        K26, K27, K28, K29, K2A, K2B,      K2D,                    K2H, K2J, K2K, K2L, \
+    K30, K31, K32, K33, K34, K35,        K36, K37, K38, K39, K3A,           K3D,        K3F,        K3H, K3J, K3K,      \
+    K40, K41, K42, K43,                  K46, K47, K48, K49, K4A, K4B,             K4E, K4F, K4G,   K4H, K4J, K4K, K4L  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05,   XXX, K07, K08, K09, K0A, K0B, K0C, K0D,   K0E, K0F, K0G,   K0H, K0J, K0K, K0L }, \
+    { K10, K11, K12, K13, K14, K15,   K16, K17, K18, K19, K1A, K1B, K1C, K1D,   K1E, K1F, K1G,   K1H, K1J, K1K, K1L }, \
+    { K20, K21, K22, K23, K24, K25,   K26, K27, K28, K29, K2A, K2B, XXX, K2D,   XXX, XXX, XXX,   K2H, K2J, K2K, K2L }, \
+    { K30, K31, K32, K33, K34, K35,   K36, K37, K38, K39, K3A, XXX, XXX, K3D,   XXX, K3F, XXX,   K3H, K3J, K3K, XXX }, \
+    { K40, K41, K42, K43, XXX, K45,   K46, K47, K48, K49, K4A, K4B, XXX, XXX,   K4E, K4F, K4G,   K4H, K4J, K4K, K4L }  \
+}
+
+#endif
diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c
new file mode 100644
index 0000000000..7923766359
--- /dev/null
+++ b/keyboards/dc01/left/matrix.c
@@ -0,0 +1,479 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_master.h"
+
+#define SLAVE_I2C_ADDRESS_RIGHT 0x19
+#define SLAVE_I2C_ADDRESS_NUMPAD 0x21
+#define SLAVE_I2C_ADDRESS_ARROW 0x23
+
+#define ERROR_DISCONNECT_COUNT 5
+static uint8_t error_count_right = 0;
+static uint8_t error_count_numpad = 0;
+static uint8_t error_count_arrow = 0;
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS_SCANNED] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+
+i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset);
+//uint8_t i2c_transaction_numpad(void);
+//uint8_t i2c_transaction_arrow(void);
+
+//this replases tmk code
+void matrix_setup(void){
+    i2c_init();
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+    
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+    if (i2c_transaction(SLAVE_I2C_ADDRESS_RIGHT, 0x3F, 0)){ //error has occured for main right half
+        error_count_right++;
+        if (error_count_right > ERROR_DISCONNECT_COUNT){ //disconnect half
+            for (uint8_t i = 0; i < MATRIX_ROWS ; i++) {
+                matrix[i] &= 0x3F; //mask bits to keep
+            }
+        }
+    }else{ //no error
+        error_count_right = 0;
+    }
+    
+    if (i2c_transaction(SLAVE_I2C_ADDRESS_ARROW, 0X3FFF, 8)){ //error has occured for arrow cluster
+        error_count_arrow++;
+        if (error_count_arrow > ERROR_DISCONNECT_COUNT){ //disconnect arrow cluster
+            for (uint8_t i = 0; i < MATRIX_ROWS ; i++) {
+                matrix[i] &= 0x3FFF; //mask bits to keep
+            }
+        }
+    }else{ //no error
+        error_count_arrow = 0;
+    }
+
+    if (i2c_transaction(SLAVE_I2C_ADDRESS_NUMPAD, 0x1FFFF, 11)){ //error has occured for numpad
+        error_count_numpad++;
+        if (error_count_numpad > ERROR_DISCONNECT_COUNT){ //disconnect numpad
+            for (uint8_t i = 0; i < MATRIX_ROWS ; i++) {
+                matrix[i] &= 0x1FFFF; //mask bits to keep
+            }
+        }
+    }else{ //no error
+        error_count_numpad = 0;
+    }
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS_SCANNED; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS_SCANNED; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS_SCANNED; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+// Complete rows from other modules over i2c
+i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) {
+    i2c_status_t err = i2c_start((address << 1) | I2C_WRITE, 10);
+    if (err) return err;
+    i2c_write(0x01, 10);
+    if (err) return err;
+
+    i2c_start((address << 1) | I2C_READ, 10);
+    if (err) return err;
+
+    err = i2c_read_ack(10);
+    if (err == 0x55) { //synchronization byte
+
+    for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
+        matrix[i] &= mask; //mask bits to keep
+        err = i2c_read_ack(10);
+        if (err >= 0) {
+            matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+        } else {
+             return err;
+        }
+      }
+    //last read request must be followed by a NACK
+    matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
+    err = i2c_read_nack(10);
+    if (err >= 0) {
+        matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+        } else {
+            return err;
+        }
+    } else {
+        i2c_stop(10);
+        return 1;
+    }
+
+    i2c_stop(10);
+    if (err) return err;
+
+    return 0;
+}
\ No newline at end of file
diff --git a/keyboards/dc01/left/readme.md b/keyboards/dc01/left/readme.md
new file mode 100644
index 0000000000..1613297d09
--- /dev/null
+++ b/keyboards/dc01/left/readme.md
@@ -0,0 +1,15 @@
+# DC01 Left Half
+
+![DC01 Left Half](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the left part that also acts as the master.
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/left:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/dc01/left/rules.mk b/keyboards/dc01/left/rules.mk
new file mode 100644
index 0000000000..1ea1f275b2
--- /dev/null
+++ b/keyboards/dc01/left/rules.mk
@@ -0,0 +1,73 @@
+SRC += matrix.c \
+      ../../../drivers/avr/i2c_master.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+CUSTOM_MATRIX = yes         # Use custom matrix
diff --git a/keyboards/dc01/numpad/config.h b/keyboards/dc01/numpad/config.h
new file mode 100644
index 0000000000..16d75b2a8f
--- /dev/null
+++ b/keyboards/dc01/numpad/config.h
@@ -0,0 +1,151 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1013
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Numpad
+#define DESCRIPTION     Numpad of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, E6, D6, D7, B4 }
+#define MATRIX_COL_PINS { F0, B7, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
\ No newline at end of file
diff --git a/keyboards/dc01/numpad/info.json b/keyboards/dc01/numpad/info.json
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/dc01/numpad/info.json
diff --git a/keyboards/dc01/numpad/keymaps/default/keymap.c b/keyboards/dc01/numpad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..a4461a7d4e
--- /dev/null
+++ b/keyboards/dc01/numpad/keymaps/default/keymap.c
@@ -0,0 +1,53 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_numpad_5x4(
+    TG(1),   KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_P7,   KC_P8,   KC_P9,            \
+    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_P1,   KC_P2,   KC_P3,            \
+      KC_P0,          KC_PDOT, KC_PENT  \
+  ),
+
+  [1] = LAYOUT_numpad_5x4(
+    _______, _______, _______, _______, \
+    KC_HOME, KC_UP,   KC_PGUP,          \
+    KC_LEFT, XXXXXXX, KC_RGHT, _______, \
+    KC_END,  KC_DOWN, KC_PGDN,          \
+      KC_INS,         KC_DEL,  _______  \
+  ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/dc01/numpad/keymaps/default/readme.md b/keyboards/dc01/numpad/keymaps/default/readme.md
new file mode 100644
index 0000000000..3691feb278
--- /dev/null
+++ b/keyboards/dc01/numpad/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default keymap for DC01 Numpad
+
+When using the numpad module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.
\ No newline at end of file
diff --git a/keyboards/dc01/numpad/keymaps/ortho_5x4/keymap.c b/keyboards/dc01/numpad/keymaps/ortho_5x4/keymap.c
new file mode 100644
index 0000000000..cde2b26e21
--- /dev/null
+++ b/keyboards/dc01/numpad/keymaps/ortho_5x4/keymap.c
@@ -0,0 +1,65 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+enum custom_keycodes {
+    KC_P00 = SAFE_RANGE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ortho_5x4(
+    TG(1),   KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
+    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
+    KC_P0,   KC_P00,  KC_PDOT, KC_PENT  \
+  ),
+
+  [1] = LAYOUT_ortho_5x4(
+    _______, _______, _______, _______, \
+    KC_HOME, KC_UP,   KC_PGUP, _______, \
+    KC_LEFT, XXXXXXX, KC_RGHT, _______, \
+    KC_END,  KC_DOWN, KC_PGDN, _______, \
+    KC_INS,  XXXXXXX, KC_DEL,  _______  \
+  ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case KC_P00:
+                // types Numpad 0 twice
+                SEND_STRING(SS_TAP(X_KP_0) SS_TAP(X_KP_0));
+                return false;
+        }
+    }
+    return true;
+};
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/dc01/numpad/keymaps/ortho_5x4/readme.md b/keyboards/dc01/numpad/keymaps/ortho_5x4/readme.md
new file mode 100644
index 0000000000..383e02da86
--- /dev/null
+++ b/keyboards/dc01/numpad/keymaps/ortho_5x4/readme.md
@@ -0,0 +1,3 @@
+# The orthopad keymap for DC01 Numpad
+
+When using the numpad module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.
\ No newline at end of file
diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c
new file mode 100644
index 0000000000..f9a9a7f63d
--- /dev/null
+++ b/keyboards/dc01/numpad/matrix.c
@@ -0,0 +1,404 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_slave.h"
+#include "lufa.h"
+
+#define SLAVE_I2C_ADDRESS 0x21
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+        if (USB_DeviceState != DEVICE_STATE_Configured){
+            txbuffer[1] = 0x55;
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++){
+                txbuffer[i+2] = matrix[i]; //send matrix over i2c
+            }
+        }
+    
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+//this replases tmk code
+void matrix_setup(void){
+    
+    if (USB_DeviceState != DEVICE_STATE_Configured){
+        i2c_init(SLAVE_I2C_ADDRESS); //setup address of slave i2c
+        sei(); //enable interupts
+    }
+}
\ No newline at end of file
diff --git a/keyboards/dc01/numpad/numpad.c b/keyboards/dc01/numpad/numpad.c
new file mode 100644
index 0000000000..04d0a33afe
--- /dev/null
+++ b/keyboards/dc01/numpad/numpad.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "numpad.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/dc01/numpad/numpad.h b/keyboards/dc01/numpad/numpad.h
new file mode 100644
index 0000000000..15e031b07c
--- /dev/null
+++ b/keyboards/dc01/numpad/numpad.h
@@ -0,0 +1,56 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef NUMPAD_H
+#define NUMPAD_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_numpad_5x4( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22,      \
+    K30, K31, K32,      \
+    K40,      K42, K43  \
+) \
+{ \
+    { K00, K01, K02, K03 }, \
+    { K10, K11, K12, K13 }, \
+    { K20, K21, K22, XXX }, \
+    { K30, K31, K32, XXX }, \
+    { K40, XXX, K42, K43 }  \
+}
+
+#define LAYOUT_ortho_5x4( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33, \
+    K40, K41, K42, K43  \
+) \
+{ \
+    { K00, K01, K02, K03 }, \
+    { K10, K11, K12, K13 }, \
+    { K20, K21, K22, K23 }, \
+    { K30, K31, K32, K33 }, \
+    { K40, K41, K42, K43 }  \
+}
+
+#endif
diff --git a/keyboards/dc01/numpad/readme.md b/keyboards/dc01/numpad/readme.md
new file mode 100644
index 0000000000..977100dde9
--- /dev/null
+++ b/keyboards/dc01/numpad/readme.md
@@ -0,0 +1,15 @@
+# DC01 Numpad
+
+![DC01 Numpad](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the numpad
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/numpad:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/dc01/numpad/rules.mk b/keyboards/dc01/numpad/rules.mk
new file mode 100644
index 0000000000..4b6cb0e473
--- /dev/null
+++ b/keyboards/dc01/numpad/rules.mk
@@ -0,0 +1,74 @@
+SRC += matrix.c \
+       ../../../drivers/avr/i2c_slave.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
+CUSTOM_MATRIX = yes         # Use custom matrix
\ No newline at end of file
diff --git a/keyboards/dc01/right/config.h b/keyboards/dc01/right/config.h
new file mode 100644
index 0000000000..a1d49cc5cb
--- /dev/null
+++ b/keyboards/dc01/right/config.h
@@ -0,0 +1,151 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1011
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Right
+#define DESCRIPTION     Right half of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
+#define MATRIX_COL_PINS { F1, E6, F6, F5, F4, D4, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
\ No newline at end of file
diff --git a/keyboards/dc01/right/info.json b/keyboards/dc01/right/info.json
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/dc01/right/info.json
diff --git a/keyboards/dc01/right/keymaps/default/keymap.c b/keyboards/dc01/right/keymaps/default/keymap.c
new file mode 100644
index 0000000000..556b77d69b
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/default/keymap.c
@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ANSI( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS, \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,  \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,                 KC_RSFT, \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL  \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/dc01/right/keymaps/default/readme.md b/keyboards/dc01/right/keymaps/default/readme.md
new file mode 100644
index 0000000000..25567a4d3f
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default ANSI keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.
\ No newline at end of file
diff --git a/keyboards/dc01/right/keymaps/hhkb_ansi/keymap.c b/keyboards/dc01/right/keymaps/hhkb_ansi/keymap.c
new file mode 100644
index 0000000000..3d38787d3c
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/hhkb_ansi/keymap.c
@@ -0,0 +1,46 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_HHKB_ANSI( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSPC,         \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,          \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,         KC_RSFT,MO(1),           \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL          \
+),
+
+[1] = LAYOUT_HHKB_ANSI(
+            KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL, \
+    KC_TRNS,KC_TRNS,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_UP,    KC_TRNS,  KC_BSPC,          \
+    KC_PAST,KC_PSLS,  KC_HOME,  KC_PGUP,  KC_LEFT,  KC_RGHT,            KC_PENT,          \
+    KC_PPLS,KC_PMNS,  KC_END,   KC_PGDN,  KC_DOWN,            KC_TRNS,  KC_TRNS,          \
+    KC_TRNS,    KC_TRNS,     KC_TRNS, KC_TRNS,     KC_TRNS,             KC_TRNS,          \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/dc01/right/keymaps/hhkb_ansi/readme.md b/keyboards/dc01/right/keymaps/hhkb_ansi/readme.md
new file mode 100644
index 0000000000..e3025fe3e4
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/hhkb_ansi/readme.md
@@ -0,0 +1,3 @@
+# The default HHKB ANSI keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.
\ No newline at end of file
diff --git a/keyboards/dc01/right/keymaps/hhkb_iso/keymap.c b/keyboards/dc01/right/keymaps/hhkb_iso/keymap.c
new file mode 100644
index 0000000000..8e020bb503
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/hhkb_iso/keymap.c
@@ -0,0 +1,46 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_HHKB_ISO( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,                  \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS,KC_ENT,           \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,         KC_RSFT,MO(1),            \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL           \
+),
+
+[1] = LAYOUT_HHKB_ISO(
+            KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL, \
+    KC_TRNS,KC_TRNS,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_UP,    KC_TRNS,                    \
+    KC_PAST,KC_PSLS,  KC_HOME,  KC_PGUP,  KC_LEFT,  KC_RGHT,  KC_TRNS,  KC_PENT,          \
+    KC_PPLS,KC_PMNS,  KC_END,   KC_PGDN,  KC_DOWN,            KC_TRNS,  KC_TRNS,          \
+    KC_TRNS,    KC_TRNS,     KC_TRNS, KC_TRNS,     KC_TRNS,             KC_TRNS,          \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/dc01/right/keymaps/hhkb_iso/readme.md b/keyboards/dc01/right/keymaps/hhkb_iso/readme.md
new file mode 100644
index 0000000000..36cae20ac9
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/hhkb_iso/readme.md
@@ -0,0 +1,3 @@
+# The default HHKB ISO keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.
\ No newline at end of file
diff --git a/keyboards/dc01/right/keymaps/iso/keymap.c b/keyboards/dc01/right/keymaps/iso/keymap.c
new file mode 100644
index 0000000000..b02a5ffdbf
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/iso/keymap.c
@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ISO( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,         \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS,KC_ENT,  \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,                 KC_RSFT, \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL  \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/dc01/right/keymaps/iso/readme.md b/keyboards/dc01/right/keymaps/iso/readme.md
new file mode 100644
index 0000000000..250169ed53
--- /dev/null
+++ b/keyboards/dc01/right/keymaps/iso/readme.md
@@ -0,0 +1,3 @@
+# The default ISO keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.
\ No newline at end of file
diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c
new file mode 100644
index 0000000000..aa2e880d01
--- /dev/null
+++ b/keyboards/dc01/right/matrix.c
@@ -0,0 +1,404 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_slave.h"
+#include "lufa.h"
+
+#define SLAVE_I2C_ADDRESS 0x19
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+        if (USB_DeviceState != DEVICE_STATE_Configured){
+            txbuffer[1] = 0x55;
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++){
+                txbuffer[i+2] = matrix[i]; //send matrix over i2c
+            }
+        }
+    
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+//this replases tmk code
+void matrix_setup(void){
+    
+    if (USB_DeviceState != DEVICE_STATE_Configured){
+        i2c_init(SLAVE_I2C_ADDRESS); //setup address of slave i2c
+        sei(); //enable interupts
+    }
+}
\ No newline at end of file
diff --git a/keyboards/dc01/right/readme.md b/keyboards/dc01/right/readme.md
new file mode 100644
index 0000000000..c8b72aaa11
--- /dev/null
+++ b/keyboards/dc01/right/readme.md
@@ -0,0 +1,15 @@
+# DC01 Right Half
+
+![DC01 Right Half](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the right part
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/right:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/dc01/right/right.c b/keyboards/dc01/right/right.c
new file mode 100644
index 0000000000..fc2dead4c2
--- /dev/null
+++ b/keyboards/dc01/right/right.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "right.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/dc01/right/right.h b/keyboards/dc01/right/right.h
new file mode 100644
index 0000000000..aa5c10ca25
--- /dev/null
+++ b/keyboards/dc01/right/right.h
@@ -0,0 +1,86 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RIGHT_H
+#define RIGHT_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_ANSI( \
+         K01, K02, K03, K04, K05, K06, K07, \
+    K10, K11, K12, K13, K14, K15, K16, K17, \
+    K20, K21, K22, K23, K24, K25,      K27, \
+    K30, K31, K32, K33, K34,           K37, \
+    K40, K41, K42, K43, K44, K45            \
+) \
+{ \
+    { XXX, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21, K22, K23, K24, K25, XXX, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, XXX, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#define LAYOUT_ISO( \
+         K01, K02, K03, K04, K05, K06, K07, \
+    K10, K11, K12, K13, K14, K15, K16,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, \
+    K30, K31, K32, K33, K34,           K37, \
+    K40, K41, K42, K43, K44, K45            \
+) \
+{ \
+    { XXX, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, XXX }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, XXX, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#define LAYOUT_HHKB_ANSI( \
+         K01, K02, K03, K04, K05, K06, K07, K00, \
+    K10, K11, K12, K13, K14, K15, K16, K17,      \
+    K20, K21, K22, K23, K24, K25,      K27,      \
+    K30, K31, K32, K33, K34,      K36, K37,      \
+    K40, K41, K42, K43, K44, K45                 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21, K22, K23, K24, K25, XXX, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#define LAYOUT_HHKB_ISO( \
+         K01, K02, K03, K04, K05, K06, K07, K00, \
+    K10, K11, K12, K13, K14, K15, K16,           \
+    K20, K21, K22, K23, K24, K25, K26, K27,      \
+    K30, K31, K32, K33, K34,      K36, K37,      \
+    K40, K41, K42, K43, K44, K45                 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, XXX }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#endif
diff --git a/keyboards/dc01/right/rules.mk b/keyboards/dc01/right/rules.mk
new file mode 100644
index 0000000000..c457893536
--- /dev/null
+++ b/keyboards/dc01/right/rules.mk
@@ -0,0 +1,74 @@
+SRC += matrix.c \
+       ../../../drivers/avr/i2c_slave.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
+CUSTOM_MATRIX = yes         # Use custom matrix
\ No newline at end of file