Remove `DESCRIPTION` (#9732)0.9.400.9.39

13 files changed, 3 insertions, 263 deletions

diff --git a/docs/config_options.md b/docs/config_options.md
index 21c9972e04..81a3b4b61c 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -43,8 +43,6 @@ This is a C header file that is one of the first things included, and will persi
   * generally who/whatever brand produced the board
 * `#define PRODUCT Board`
   * the name of the keyboard
-* `#define DESCRIPTION a keyboard`
-  * a short description of what the keyboard is
 * `#define MATRIX_ROWS 5`
   * the number of rows in your keyboard's matrix
 * `#define MATRIX_COLS 15`
diff --git a/docs/es/hardware_avr.md b/docs/es/hardware_avr.md
index 4236292a12..2ecf78d662 100644
--- a/docs/es/hardware_avr.md
+++ b/docs/es/hardware_avr.md
@@ -67,7 +67,7 @@ El archivo `config.h` es donde configuras el hardware y el conjunto de caracterÃ
 
 En la parte superior de `config.h` encontrarás ajustes relacionados con USB. Estos controlan la apariencia de tu teclado en el Sistema Operativo. Si no tienes una buena razón para cambiar debes dejar el `VENDOR_ID` como `0xFEED`. Para el `PRODUCT_ID` debes seleccionar un número que todavía no esté en uso.
 
-Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar con precisión tu teclado.
+Cambia las líneas de `MANUFACTURER` y `PRODUCT` para reflejar con precisión tu teclado.
 
 ```c
 #define VENDOR_ID       0xFEED
@@ -75,7 +75,6 @@ Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar c
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Tú
 #define PRODUCT         mi_teclado_fantastico
-#define DESCRIPTION     Un teclado personalizado
 ```
 
 ?> Windows y macOS mostrarán el `MANUFACTURER` y `PRODUCT` en la lista de dispositivos USB. `lsusb` en Linux toma estos de la lista mantenida por el [Repositorio de ID USB](http://www.linux-usb.org/usb-ids.html) por defecto. `lsusb -v` mostrará los valores reportados por el dispositivo, y también están presentes en los registros del núcleo después de conectarlo.
diff --git a/docs/hardware_avr.md b/docs/hardware_avr.md
index 697c55d2a8..2c0f2e9a1a 100644
--- a/docs/hardware_avr.md
+++ b/docs/hardware_avr.md
@@ -67,7 +67,7 @@ The `config.h` file is where you configure the hardware and feature set for your
 
 At the top of the `config.h` you'll find USB related settings. These control how your keyboard appears to the Operating System. If you don't have a good reason to change you should leave the `VENDOR_ID` as `0xFEED`. For the `PRODUCT_ID` you should pick a number that is not yet in use.
 
-Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately reflect your keyboard.
+Do change the `MANUFACTURER` and `PRODUCT` lines to accurately reflect your keyboard.
 
 ```c
 #define VENDOR_ID       0xFEED
@@ -75,7 +75,6 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    You
 #define PRODUCT         my_awesome_keyboard
-#define DESCRIPTION     A custom keyboard
 ```
 
 ?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead takes these from the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. `lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md
index 9e0dd71472..55ee2cfbe9 100644
--- a/docs/ja/config_options.md
+++ b/docs/ja/config_options.md
@@ -48,8 +48,6 @@ QMK ã�§ã�®å…¨ã�¦ã�®åˆ©ç”¨å�¯èƒ½ã�ªè¨­å®šã�«ã�¯ãƒ‡ãƒ•ã‚©ãƒ«ãƒˆã�Œã�‚ã‚Šã�¾ã�™ã€‚ã
   * 一般的��誰も�����ブランド�ボードを作����
 * `#define PRODUCT Board`
   * キーボード���
-* `#define DESCRIPTION a keyboard`
-  * キーボード�簡��説明
 * `#define MATRIX_ROWS 5`
   * キーボード�マトリックス�行�数
 * `#define MATRIX_COLS 15`
diff --git a/docs/ja/hardware_avr.md b/docs/ja/hardware_avr.md
index fecbfd71ff..0cba943c15 100644
--- a/docs/ja/hardware_avr.md
+++ b/docs/ja/hardware_avr.md
@@ -73,7 +73,7 @@ or open the directory in your favourite text editor.
 
 `config.h` �先頭�� USB �関�る設定��り��。�れら�キーボード� OS �ら��よ��見�る�を制御�����。変更�る�由���場���`VENDOR_ID` を `0xFEED` ��������必���り��。`PRODUCT_ID` ����使用�れ����番�を����れ�����ん。
 
-`MANUFACTURER`� `PRODUCT`� `DESCRIPTION` をキーボード����設定�変更���。
+`MANUFACTURER`� `PRODUCT` をキーボード����設定�変更���。
 
 ```c
 #define VENDOR_ID       0xFEED
@@ -81,7 +81,6 @@ or open the directory in your favourite text editor.
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    You
 #define PRODUCT         my_awesome_keyboard
-#define DESCRIPTION     A custom keyboard
 ```
 
 ?> Windows や macOS ���`MANUFACTURER` � `PRODUCT` � USBデ�イス�リスト�表示�れ��。Linux 上� `lsusb` ���代�り�デフォルト� [USB ID Repository](http://www.linux-usb.org/usb-ids.html) �よ��維��れ��るリスト�ら�れらを�得���。`lsusb -v` を使用�る�デ�イス�ら示�れ�値を表示���。���接続�����カー�ルログ�も表示�れ��。
diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py
index e1ace5d51b..de7632e378 100644
--- a/lib/python/qmk/info.py
+++ b/lib/python/qmk/info.py
@@ -77,7 +77,6 @@ def _extract_config_h(info_data):
         'device_ver': config_c.get('DEVICE_VER'),
         'manufacturer': config_c.get('MANUFACTURER'),
         'product': config_c.get('PRODUCT'),
-        'description': config_c.get('DESCRIPTION'),
     }
 
     return info_data
diff --git a/quantum/template/avr/config.h b/quantum/template/avr/config.h
index 8b0961f24b..5f0bc73633 100644
--- a/quantum/template/avr/config.h
+++ b/quantum/template/avr/config.h
@@ -25,7 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEVICE_VER   0x0001
 #define MANUFACTURER %YOUR_NAME%
 #define PRODUCT      %KEYBOARD%
-#define DESCRIPTION  A custom keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 2
diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index 126afbcbd7..ef065c0f10 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -25,7 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEVICE_VER   0x0001
 #define MANUFACTURER %YOUR_NAME%
 #define PRODUCT      %KEYBOARD%
-#define DESCRIPTION  A custom keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 8
diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c
index 3cfcba3058..ef6a39c0fe 100644
--- a/tmk_core/common/command.c
+++ b/tmk_core/common/command.c
@@ -141,7 +141,6 @@ static void command_common_help(void) {
 static void print_version(void) {
     // print version & information
     print("\n\t- Version -\n");
-    print("DESC: " STR(DESCRIPTION) "\n");
     print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
                                                        "PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
                                                                                                 "VER: " STR(DEVICE_VER) "\n");
diff --git a/tmk_core/protocol/usb_hid/test/Makefile b/tmk_core/protocol/usb_hid/test/Makefile
deleted file mode 100644
index 83bf2aed67..0000000000
--- a/tmk_core/protocol/usb_hid/test/Makefile
+++ /dev/null
@@ -1,126 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = usb_hid_test
-
-TMK_DIR = ../../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# MCU name
-MCU = atmega32u4
-
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-
-# Build Options
-#   comment out to disable the options.
-#
-# Console for debug
-OPT_DEFS += -DCONSOLE_ENABLE
-
-# Boot Section Size in bytes
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#OPT_DEFS += -DBOOT_SIZE=4096
-
-
-
-SRC =  test.cpp
-SRC += common/debug.c
-SRC += common/print.c
-
-CONFIG_H = config.h
-
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-VPATH += $(TMK_DIR)/common
-
-
-
-# program Leonardo
-PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex
-
-
-
-include $(TMK_DIR)/protocol/usb_hid.mk
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/rules.mk
diff --git a/tmk_core/protocol/usb_hid/test/config.h b/tmk_core/protocol/usb_hid/test/config.h
deleted file mode 100644
index 71a6814fd1..0000000000
--- a/tmk_core/protocol/usb_hid/test/config.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xCAFE
-#define DEVICE_VER      0x0814
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         USB to USB keyboard converter
-
-#define DESCRIPTION     Product from t.m.k. keyboard firmware project
-
-/* matrix size */
-#define MATRIX_ROWS 32
-#define MATRIX_COLS 8
diff --git a/tmk_core/protocol/usb_hid/test/test.cpp b/tmk_core/protocol/usb_hid/test/test.cpp
deleted file mode 100644
index 4958f0c619..0000000000
--- a/tmk_core/protocol/usb_hid/test/test.cpp
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <util/delay.h>
-#include <Arduino.h>
-
-// USB HID host
-#include "Usb.h"
-#include "hid.h"
-#include "hidboot.h"
-#include "parser.h"
-
-// LUFA
-#include "lufa.h"
-
-#include "debug.h"
-
-#include "leonardo_led.h"
-
-
-static USB     usb_host;
-static HIDBoot<HID_PROTOCOL_KEYBOARD>    kbd(&usb_host);
-static KBDReportParser kbd_parser;
-
-static void LUFA_setup(void)
-{
-    /* Disable watchdog if enabled by bootloader/fuses */
-    MCUSR &= ~(1 << WDRF);
-    wdt_disable();
-
-    /* Disable clock division */
-    clock_prescale_set(clock_div_1);
-
-    // Leonardo needs. Without this USB device is not recognized.
-    USB_Disable();
-
-    USB_Init();
-
-    // for Console_Task
-    USB_Device_EnableSOFEvents();
-}
-
-static void HID_setup()
-{
-    // Arduino Timer startup: wiring.c
-    init();
-
-    if (usb_host.Init() == -1) {
-        debug("HID init: failed\n");
-        LED_TX_OFF;
-    }
-  
-    _delay_ms(200);
-      
-    kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser);
-}
-
-int main(void)
-{
-    // LED for debug
-    LED_TX_INIT;
-    LED_TX_ON;
-
-    print_enable = true;
-    debug_enable = true;
-    debug_matrix = true;
-    debug_keyboard = true;
-    debug_mouse = true;
-
-    LUFA_setup();
-    sei();
-
-    // wait for startup of sendchar routine
-    while (USB_DeviceState != DEVICE_STATE_Configured) ;
-    if (debug_enable) {
-        _delay_ms(1000);
-    }
-
-    HID_setup();
-    
-    debug("init: done\n");
-    for (;;) {
-        usb_host.Task();
-
-#if !defined(INTERRUPT_CONTROL_ENDPOINT)
-        // LUFA Task for control request
-        USB_USBTask();
-#endif
-    }
-        
-    return 0;
-}
diff --git a/tmk_core/readme.md b/tmk_core/readme.md
index 71b8d2e9fc..5b719bca5d 100644
--- a/tmk_core/readme.md
+++ b/tmk_core/readme.md
@@ -67,7 +67,6 @@ Start Your Own Project
     #define PRODUCT_ID      0xBEEF
     #define MANUFACTURER    t.m.k.
     #define PRODUCT         Macway mod
-    #define DESCRIPTION     t.m.k. keyboard firmware for Macway mod
 
 #### 2. Keyboard matrix configuration
     #define MATRIX_ROWS 8