Move everything to Python 3.6 (#8835)0.8.125

11 files changed, 30 insertions, 32 deletions

diff --git a/bin/qmk b/bin/qmk
index 750ff2bdb7..801852d4e8 100755
--- a/bin/qmk
+++ b/bin/qmk
@@ -35,7 +35,7 @@ def _check_modules(requirements):
 
             if not find_spec(module['import']):
                 print('Could not find module %s!' % module['name'])
-                print('Please run `python3 -m pip install -r %s` to install required python dependencies.' % str(qmk_dir / requirements))
+                print('Please run `python3 -m pip install -r %s` to install required python dependencies.' % (qmk_dir / requirements,))
                 if developer:
                     print('You can also turn off developer mode: qmk config user.developer=None')
                 print()
diff --git a/docs/cli.md b/docs/cli.md
index 760fe1cdb5..01641bd8b8 100644
--- a/docs/cli.md
+++ b/docs/cli.md
@@ -6,7 +6,7 @@ The QMK CLI makes building and working with QMK keyboards easier. We have provid
 
 ### Requirements :id=requirements
 
-The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt). These are installed automatically when you install the QMK CLI.
+QMK requires Python 3.6 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt). These are installed automatically when you install the QMK CLI.
 
 ### Install Using Homebrew (macOS, some Linux) :id=install-using-homebrew
 
@@ -21,7 +21,7 @@ qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build
 
 ### Install Using easy_install or pip :id=install-using-easy_install-or-pip
 
-If your system is not listed above you can install QMK manually. First ensure that you have python 3.5 (or later) installed and have installed pip. Then install QMK with this command:
+If your system is not listed above you can install QMK manually. First ensure that you have python 3.6 (or later) installed and have installed pip. Then install QMK with this command:
 
 ```
 pip3 install qmk
diff --git a/docs/cli_development.md b/docs/cli_development.md
index 2a967de4ab..af86686c07 100644
--- a/docs/cli_development.md
+++ b/docs/cli_development.md
@@ -44,7 +44,7 @@ def hello(cli):
 
 First we import the `cli` object from `milc`. This is how we interact with the user and control the script's behavior. We use `@cli.argument()` to define a command line flag, `--name`. This also creates a configuration variable named `hello.name` (and the corresponding `user.name`) which the user can set so they don't have to specify the argument. The `cli.subcommand()` decorator designates this function as a subcommand. The name of the subcommand will be taken from the name of the function.
 
-Once inside our function we find a typical "Hello, World!" program. We use `cli.log` to access the underlying [Logger Object](https://docs.python.org/3.5/library/logging.html#logger-objects), whose behavior is user controllable. We also access the value for name supplied by the user as `cli.config.hello.name`. The value for `cli.config.hello.name` will be determined by looking at the `--name` argument supplied by the user, if not provided it will use the value in the `qmk.ini` config file, and if neither of those is provided it will fall back to the default supplied in the `cli.argument()` decorator.
+Once inside our function we find a typical "Hello, World!" program. We use `cli.log` to access the underlying [Logger Object](https://docs.python.org/3.6/library/logging.html#logger-objects), whose behavior is user controllable. We also access the value for name supplied by the user as `cli.config.hello.name`. The value for `cli.config.hello.name` will be determined by looking at the `--name` argument supplied by the user, if not provided it will use the value in the `qmk.ini` config file, and if neither of those is provided it will fall back to the default supplied in the `cli.argument()` decorator.
 
 # User Interaction
 
@@ -56,13 +56,13 @@ There are two main methods for outputting text in a subcommand- `cli.log` and `c
 
 You can use special tokens to colorize your text, to make it easier to understand the output of your program. See [Colorizing Text](#colorizing-text) below.
 
-Both of these methods support built-in string formatting using python's [printf style string format operations](https://docs.python.org/3.5/library/stdtypes.html#old-string-formatting). You can use tokens such as `%s` and `%d` within your text strings then pass the values as arguments. See our Hello, World program above for an example.
+Both of these methods support built-in string formatting using python's [printf style string format operations](https://docs.python.org/3.6/library/stdtypes.html#old-string-formatting). You can use tokens such as `%s` and `%d` within your text strings then pass the values as arguments. See our Hello, World program above for an example.
 
 You should never use the format operator (`%`) directly, always pass values as arguments.
 
 ### Logging (`cli.log`)
 
-The `cli.log` object gives you access to a [Logger Object](https://docs.python.org/3.5/library/logging.html#logger-objects). We have configured our log output to show the user a nice emoji for each log level (or the log level name if their terminal does not support unicode.) This way the user can tell at a glance which messages are most important when something goes wrong.
+The `cli.log` object gives you access to a [Logger Object](https://docs.python.org/3.6/library/logging.html#logger-objects). We have configured our log output to show the user a nice emoji for each log level (or the log level name if their terminal does not support unicode.) This way the user can tell at a glance which messages are most important when something goes wrong.
 
 The default log level is `INFO`. If the user runs `qmk -v <subcommand>` the default log level will be set to `DEBUG`.
 
diff --git a/docs/coding_conventions_python.md b/docs/coding_conventions_python.md
index 1aefc044e8..47dff7f8ee 100644
--- a/docs/coding_conventions_python.md
+++ b/docs/coding_conventions_python.md
@@ -2,7 +2,7 @@
 
 Most of our style follows PEP8 with some local modifications to make things less nit-picky. 
 
-* We target Python 3.5 for compatability with all supported platforms.
+* We target Python 3.6 for compatability with all supported platforms.
 * We indent using four (4) spaces (soft tabs)
 * We encourage liberal use of comments
   * Think of them as a story describing the feature
@@ -317,7 +317,7 @@ At the time of this writing our tests are not very comprehensive. Looking at the
 
 ## Integration Tests
 
-Integration tests can be found in `lib/python/qmk/tests/test_cli_commands.py`. This is where CLI commands are actually run and their overall behavior is verified. We use [`subprocess`](https://docs.python.org/3.5/library/subprocess.html#module-subprocess) to launch each CLI command and a combination of checking output and returncode to determine if the right thing happened.
+Integration tests can be found in `lib/python/qmk/tests/test_cli_commands.py`. This is where CLI commands are actually run and their overall behavior is verified. We use [`subprocess`](https://docs.python.org/3.6/library/subprocess.html#module-subprocess) to launch each CLI command and a combination of checking output and returncode to determine if the right thing happened.
 
 ## Unit Tests
 
diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py
index eb524217cd..394a1353bc 100644
--- a/lib/python/qmk/cli/__init__.py
+++ b/lib/python/qmk/cli/__init__.py
@@ -2,6 +2,8 @@
 
 We list each subcommand here explicitly because all the reliable ways of searching for modules are slow and delay startup.
 """
+import sys
+
 from milc import cli
 
 from . import cformat
@@ -19,5 +21,6 @@ from . import new
 from . import pyformat
 from . import pytest
 
-if not hasattr(cli, 'config_source'):
-    cli.log.warning("Your QMK CLI is out of date. Please upgrade with `pip3 install --upgrade qmk` or by using your package manager.")
+if sys.version_info[0] != 3 or sys.version_info[1] < 6:
+    cli.log.error('Your Python is too old! Please upgrade to Python 3.6 or later.')
+    exit(127)
diff --git a/lib/python/qmk/cli/cformat.py b/lib/python/qmk/cli/cformat.py
index 536ee30fd8..0cd8b6192a 100644
--- a/lib/python/qmk/cli/cformat.py
+++ b/lib/python/qmk/cli/cformat.py
@@ -22,9 +22,8 @@ def cformat_run(files, all_files):
             cli.log.warn('No changes detected. Use "qmk cformat -a" to format all files')
             return False
         if files and all_files:
-            cli.log.warning('Filenames passed with -a, only formatting: %s', ','.join(cli.args.files))
-        # 3.6+: Can remove the str casting, python will cast implicitly
-        subprocess.run(clang_format + [str(file) for file in files], check=True)
+            cli.log.warning('Filenames passed with -a, only formatting: %s', ','.join(files))
+        subprocess.run(clang_format + [file for file in files], check=True)
         cli.log.info('Successfully formatted the C code.')
 
     except subprocess.CalledProcessError:
diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py
index 3c74fae699..3c46248372 100755
--- a/lib/python/qmk/cli/doctor.py
+++ b/lib/python/qmk/cli/doctor.py
@@ -135,16 +135,15 @@ def check_udev_rules():
     }
 
     if udev_dir.exists():
-        udev_rules = [str(rule_file) for rule_file in udev_dir.glob('*.rules')]
+        udev_rules = [rule_file for rule_file in udev_dir.glob('*.rules')]
         current_rules = set()
 
         # Collect all rules from the config files
         for rule_file in udev_rules:
-            with open(rule_file, "r") as fd:
-                for line in fd.readlines():
-                    line = line.strip()
-                    if not line.startswith("#") and len(line):
-                        current_rules.add(line)
+            for line in rule_file.read_text().split('\n'):
+                line = line.strip()
+                if not line.startswith("#") and len(line):
+                    current_rules.add(line)
 
         # Check if the desired rules are among the currently present rules
         for bootloader, rules in desired_rules.items():
diff --git a/lib/python/qmk/cli/json2c.py b/lib/python/qmk/cli/json2c.py
index 46c4d04bb7..5218405070 100755
--- a/lib/python/qmk/cli/json2c.py
+++ b/lib/python/qmk/cli/json2c.py
@@ -10,29 +10,27 @@ import qmk.path
 
 @cli.argument('-o', '--output', arg_only=True, type=qmk.path.normpath, help='File to write to')
 @cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages")
-@cli.argument('filename', arg_only=True, help='Configurator JSON file')
+@cli.argument('filename', type=qmk.path.normpath, arg_only=True, help='Configurator JSON file')
 @cli.subcommand('Creates a keymap.c from a QMK Configurator export.')
 def json2c(cli):
     """Generate a keymap.c from a configurator export.
 
     This command uses the `qmk.keymap` module to generate a keymap.c from a configurator export. The generated keymap is written to stdout, or to a file if -o is provided.
     """
-    cli.args.filename = qmk.path.normpath(cli.args.filename)
-
     # Error checking
     if not cli.args.filename.exists():
         cli.log.error('JSON file does not exist!')
         cli.print_usage()
         exit(1)
 
-    if str(cli.args.filename) == '-':
+    if cli.args.filename.name == '-':
         # TODO(skullydazed/anyone): Read file contents from STDIN
         cli.log.error('Reading from STDIN is not (yet) supported.')
         cli.print_usage()
         exit(1)
 
     # Environment processing
-    if cli.args.output == ('-'):
+    if cli.args.output.name == ('-'):
         cli.args.output = None
 
     # Parse the configurator json
diff --git a/lib/python/qmk/cli/kle2json.py b/lib/python/qmk/cli/kle2json.py
index 3ed6594e0b..5268462f92 100755
--- a/lib/python/qmk/cli/kle2json.py
+++ b/lib/python/qmk/cli/kle2json.py
@@ -37,12 +37,12 @@ def kle2json(cli):
         file_path = Path(os.environ['ORIG_CWD'], cli.args.filename)
     # Check for valid file_path for more graceful failure
     if not file_path.exists():
-        return cli.log.error('File {fg_cyan}%s{style_reset_all} was not found.', str(file_path))
+        return cli.log.error('File {fg_cyan}%s{style_reset_all} was not found.', file_path)
     out_path = file_path.parent
     raw_code = file_path.open().read()
     # Check if info.json exists, allow overwrite with force
     if Path(out_path, "info.json").exists() and not cli.args.force:
-        cli.log.error('File {fg_cyan}%s/info.json{style_reset_all} already exists, use -f or --force to overwrite.', str(out_path))
+        cli.log.error('File {fg_cyan}%s/info.json{style_reset_all} already exists, use -f or --force to overwrite.', out_path)
         return False
     try:
         # Convert KLE raw to x/y coordinates (using kle2xy package from skullydazed)
@@ -69,7 +69,7 @@ def kle2json(cli):
     # Replace layout in keyboard json
     keyboard = keyboard.replace('"LAYOUT_JSON_HERE"', layout)
     # Write our info.json
-    file = open(str(out_path) + "/info.json", "w")
+    file = open(out_path + "/info.json", "w")
     file.write(keyboard)
     file.close()
-    cli.log.info('Wrote out {fg_cyan}%s/info.json', str(out_path))
+    cli.log.info('Wrote out {fg_cyan}%s/info.json', out_path)
diff --git a/lib/python/qmk/cli/new/keymap.py b/lib/python/qmk/cli/new/keymap.py
index 5ae2628565..474fe7974f 100755
--- a/lib/python/qmk/cli/new/keymap.py
+++ b/lib/python/qmk/cli/new/keymap.py
@@ -40,7 +40,7 @@ def new_keymap(cli):
         exit(1)
 
     # create user directory with default keymap files
-    shutil.copytree(str(keymap_path_default), str(keymap_path_new), symlinks=True)
+    shutil.copytree(keymap_path_default, keymap_path_new, symlinks=True)
 
     # end message to user
     cli.log.info("%s keymap directory created in: %s", keymap, keymap_path_new)
diff --git a/lib/python/qmk/keymap.py b/lib/python/qmk/keymap.py
index 4aa87de20d..69cdc8d5b5 100644
--- a/lib/python/qmk/keymap.py
+++ b/lib/python/qmk/keymap.py
@@ -1,6 +1,5 @@
 """Functions that help you work with QMK keymaps.
 """
-import os
 from pathlib import Path
 
 import qmk.path
@@ -127,7 +126,7 @@ def list_keymaps(keyboard_name):
         while kb_path != keyboards_dir:
             keymaps_dir = kb_path / "keymaps"
             if keymaps_dir.exists():
-                names = names.union([keymap for keymap in os.listdir(str(keymaps_dir)) if (keymaps_dir / keymap / "keymap.c").is_file()])
+                names = names.union([keymap for keymap in keymaps_dir.iterdir() if (keymaps_dir / keymap / "keymap.c").is_file()])
             kb_path = kb_path.parent
 
         # if community layouts are supported, get them
@@ -135,6 +134,6 @@ def list_keymaps(keyboard_name):
             for layout in rules_mk["LAYOUTS"].split():
                 cl_path = Path.cwd() / "layouts" / "community" / layout
                 if cl_path.exists():
-                    names = names.union([keymap for keymap in os.listdir(str(cl_path)) if (cl_path / keymap / "keymap.c").is_file()])
+                    names = names.union([keymap for keymap in cl_path.iterdir() if (cl_path / keymap / "keymap.c").is_file()])
 
     return sorted(names)