diff options
| author | Danny Nguyen <danny@80pct.com> | 2017-08-03 14:33:55 -0400 |
|---|---|---|
| committer | Jack Humbert <jack.humb@gmail.com> | 2017-08-03 20:56:21 -0400 |
| commit | 479139f9d4ef981a2f10918f0fb5a2c148ca0c8b (patch) | |
| tree | 29f6ed84e45aedda0431c0bb2176f1621f2dad7a | |
| parent | e0caf94323d5cc0baae38af11984902fb1a5375f (diff) | |
Fix location of where the make command should be run0.5.93
| -rw-r--r-- | keyboards/lets_split/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/minidox/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/nyquist/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/orthodox/readme.md | 2 |
4 files changed, 8 insertions, 6 deletions
diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index 610b776ee1..0ef7ff59d7 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -106,7 +106,7 @@ Notes on Software Configuration ------------------------------- Configuring the firmware is similar to any other QMK project. One thing -to note is that `MATIX_ROWS` in `config.h` is the total number of rows between +to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between the two halves, i.e. if your split keyboard has 4 rows in each half, then `MATRIX_ROWS=8`. @@ -115,7 +115,7 @@ not be very difficult to adapt it to support more if required. Flashing ------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +From the `lets_split` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. Example: `make rev2-default-avrdude` diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md index da89714867..c15fd244a4 100644 --- a/keyboards/minidox/readme.md +++ b/keyboards/minidox/readme.md @@ -1,7 +1,7 @@ MiniDox ===== - + A compact version of the ErgoDox @@ -22,7 +22,7 @@ Flashing ------- Note: Most of this is copied from the Let's Split readme, because it is awesome -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +From the `minidox` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. Example: `make rev1-default-avrdude` Choosing which board to plug the USB cable into (choosing Master) diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md index c70bf02576..61b9317d52 100644 --- a/keyboards/nyquist/readme.md +++ b/keyboards/nyquist/readme.md @@ -6,6 +6,8 @@ The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It ha ## Build Guide +A build log of the Nyquist can be found here: [Nyquist Build Log](http://imgur.com/a/dD4sX). + Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) There is additional information there about flashing and adding RGB underglow. @@ -98,7 +100,7 @@ unnecessary in simple use cases. Flashing ------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +From the `nyquist` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. Example: `make rev1-serial-avrdude` diff --git a/keyboards/orthodox/readme.md b/keyboards/orthodox/readme.md index 57e940b0f4..e1fbf94baf 100644 --- a/keyboards/orthodox/readme.md +++ b/keyboards/orthodox/readme.md @@ -96,7 +96,7 @@ the two halves, i.e. if your split keyboard has 3 rows in each half, then Flashing ------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +From the `orthodox` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. Example: `make rev2-default-avrdude` |