12 files changed, 393 insertions, 163 deletions
diff --git a/docs/installation/alpine_linux_en.md b/docs/installation/alpine_linux_en.md
index 2a9b8f6ff..a5683f18c 100644
--- a/docs/installation/alpine_linux_en.md
+++ b/docs/installation/alpine_linux_en.md
@@ -14,6 +14,7 @@ It assumes that you have administrative rights, either as root or a user with [s
 * `erlang-xmerl`
 * `git`
 * Development Tools
+* `cmake`
 
 #### Optional packages used in this guide
 
@@ -39,7 +40,7 @@ sudo apk upgrade
 * Install some tools, which are needed later:
 
 ```shell
-sudo apk add git build-base
+sudo apk add git build-base cmake
 ```
 
 ### Install Elixir and Erlang
@@ -225,10 +226,7 @@ sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress
 
 #### Further reading
 
-* [Backup your instance](../administration/backup.md)
-* [Hardening your instance](../configuration/hardening.md)
-* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)
+{! backend/installation/further_reading.include !}
 
 ## Questions
 
diff --git a/docs/installation/arch_linux_en.md b/docs/installation/arch_linux_en.md
index 8370986ad..7fb69dd60 100644
--- a/docs/installation/arch_linux_en.md
+++ b/docs/installation/arch_linux_en.md
@@ -9,6 +9,7 @@ This guide will assume that you have administrative rights, either as root or a
 * `elixir`
 * `git`
 * `base-devel`
+* `cmake`
 
 #### Optional packages used in this guide
 
@@ -26,7 +27,7 @@ sudo pacman -Syu
 * Install some of the above mentioned programs:
 
 ```shell
-sudo pacman -S git base-devel elixir
+sudo pacman -S git base-devel elixir cmake
 ```
 
 ### Install PostgreSQL
@@ -200,10 +201,7 @@ sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress
 
 #### Further reading
 
-* [Backup your instance](../administration/backup.md)
-* [Hardening your instance](../configuration/hardening.md)
-* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)
+{! backend/installation/further_reading.include !}
 
 ## Questions
 
diff --git a/docs/installation/debian_based_en.md b/docs/installation/debian_based_en.md
index fe2dbb92d..60c2f47e5 100644
--- a/docs/installation/debian_based_en.md
+++ b/docs/installation/debian_based_en.md
@@ -7,15 +7,12 @@ This guide will assume you are on Debian Stretch. This guide should also work wi
 
 * `postgresql` (9.6+, Ubuntu 16.04 comes with 9.5, you can get a newer version from [here](https://www.postgresql.org/download/linux/ubuntu/))
 * `postgresql-contrib` (9.6+, same situtation as above)
-* `elixir` (1.5+, [install from here, Debian and Ubuntu ship older versions](https://elixir-lang.org/install.html#unix-and-unix-like) or use [asdf](https://github.com/asdf-vm/asdf) as the pleroma user)
+* `elixir` (1.8+, Follow the guide to install from the Erlang Solutions repo or use [asdf](https://github.com/asdf-vm/asdf) as the pleroma user)
 * `erlang-dev`
-* `erlang-tools`
-* `erlang-parsetools`
-* `erlang-eldap`, if you want to enable ldap authenticator
-* `erlang-ssh`
-* `erlang-xmerl`
+* `erlang-nox`
 * `git`
 * `build-essential`
+* `cmake`
 
 #### Optional packages used in this guide
 
@@ -34,7 +31,7 @@ sudo apt full-upgrade
 * Install some of the above mentioned programs:
 
 ```shell
-sudo apt install git build-essential postgresql postgresql-contrib
+sudo apt install git build-essential postgresql postgresql-contrib cmake
 ```
 
 ### Install Elixir and Erlang
@@ -42,15 +39,15 @@ sudo apt install git build-essential postgresql postgresql-contrib
 * Download and add the Erlang repository:
 
 ```shell
-wget -P /tmp/ https://packages.erlang-solutions.com/erlang-solutions_1.0_all.deb
-sudo dpkg -i /tmp/erlang-solutions_1.0_all.deb
+wget -P /tmp/ https://packages.erlang-solutions.com/erlang-solutions_2.0_all.deb
+sudo dpkg -i /tmp/erlang-solutions_2.0_all.deb
 ```
 
 * Install Elixir and Erlang:
 
 ```shell
 sudo apt update
-sudo apt install elixir erlang-dev erlang-parsetools erlang-xmerl erlang-tools erlang-ssh
+sudo apt install elixir erlang-dev erlang-nox
 ```
 
 ### Install PleromaBE
@@ -190,10 +187,7 @@ sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress
 
 #### Further reading
 
-* [Backup your instance](../administration/backup.md)
-* [Hardening your instance](../configuration/hardening.md)
-* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)
+{! backend/installation/further_reading.include !}
 
 ## Questions
 
diff --git a/docs/installation/debian_based_jp.md b/docs/installation/debian_based_jp.md
index 7aa0bcc24..c2dd840d3 100644
--- a/docs/installation/debian_based_jp.md
+++ b/docs/installation/debian_based_jp.md
@@ -10,21 +10,18 @@
 ### 必要なソフトウェア
 
 - PostgreSQL 9.6以上 (Ubuntu16.04では9.5しか提供されていないので，[](https://www.postgresql.org/download/linux/ubuntu/)こちらから新しいバージョンを入手してください)
-- postgresql-contrib 9.6以上 (同上)
-- Elixir 1.5 以上 ([Debianのリポジトリからインストールしないこと！！！ ここからインストールすること！](https://elixir-lang.org/install.html#unix-and-unix-like)。または [asdf](https://github.com/asdf-vm/asdf) をpleromaユーザーでインストールしてください)
-  - erlang-dev
-- erlang-tools
-- erlang-parsetools
-- erlang-eldap (LDAP認証を有効化するときのみ必要)
-- erlang-ssh
-- erlang-xmerl
-- git
-- build-essential
+- `postgresql-contrib` 9.6以上 (同上)
+- Elixir 1.8 以上 ([Debianのリポジトリからインストールしないこと！！！ ここからインストールすること！](https://elixir-lang.org/install.html#unix-and-unix-like)。または [asdf](https://github.com/asdf-vm/asdf) をpleromaユーザーでインストールしてください)
+- `erlang-dev`
+- `erlang-nox`
+- `git`
+- `build-essential`
+- `cmake`
 
 #### このガイドで利用している追加パッケージ
 
-- nginx (おすすめです。他のリバースプロキシを使う場合は、参考となる設定をこのリポジトリから探してください)
-- certbot (または何らかのLet's Encrypt向けACMEクライアント)
+- `nginx` (おすすめです。他のリバースプロキシを使う場合は、参考となる設定をこのリポジトリから探してください)
+- `certbot` (または何らかのLet's Encrypt向けACMEクライアント)
 
 ### システムを準備する
 
@@ -36,7 +33,7 @@ sudo apt full-upgrade
 
 * 上記に挙げたパッケージをインストールしておきます。
 ```
-sudo apt install git build-essential postgresql postgresql-contrib
+sudo apt install git build-essential postgresql postgresql-contrib cmake
 ```
 
 
@@ -44,14 +41,14 @@ sudo apt install git build-essential postgresql postgresql-contrib
 
 * Erlangのリポジトリをダウンロードおよびインストールします。
 ```
-wget -P /tmp/ https://packages.erlang-solutions.com/erlang-solutions_1.0_all.deb
-sudo dpkg -i /tmp/erlang-solutions_1.0_all.deb
+wget -P /tmp/ https://packages.erlang-solutions.com/erlang-solutions_2.0_all.deb
+sudo dpkg -i /tmp/erlang-solutions_2.0_all.deb
 ```
 
 * ElixirとErlangをインストールします、
 ```
 sudo apt update
-sudo apt install elixir erlang-dev erlang-parsetools erlang-xmerl erlang-tools erlang-ssh
+sudo apt install elixir erlang-dev erlang-nox
 ```
 
 ### Pleroma BE (バックエンド) をインストールします
@@ -179,10 +176,7 @@ sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress
 
 #### その他の設定とカスタマイズ
 
-* [Backup your instance](../administration/backup.md)
-* [Hardening your instance](../configuration/hardening.md)
-* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)
+{! backend/installation/further_reading.include !}
 
 ## 質問ある？
 
diff --git a/docs/installation/freebsd_en.md b/docs/installation/freebsd_en.md
new file mode 100644
index 000000000..130d68766
--- /dev/null
+++ b/docs/installation/freebsd_en.md
@@ -0,0 +1,210 @@
+# Installing on FreeBSD 
+
+This document was written for FreeBSD 12.1, but should be work on future releases.
+
+## Required software 
+
+This assumes the target system has `pkg(8)`.
+
+```
+# pkg install elixir postgresql12-server postgresql12-client postgresql12-contrib git-lite sudo nginx gmake acme.sh
+```
+
+Copy the rc.d scripts to the right directory:
+
+Setup the required services to automatically start at boot, using `sysrc(8)`.
+
+```
+# sysrc nginx_enable=YES
+# sysrc postgresql_enable=YES
+```
+
+## Initialize postgres
+
+```
+# service postgresql initdb
+# service postgresql start
+```
+
+## Configuring Pleroma
+
+Create a user for Pleroma:
+
+```
+# pw add user pleroma -m
+# echo 'export LC_ALL="en_US.UTF-8"' >> /home/pleroma/.profile
+# su -l pleroma
+```
+
+Clone the repository:
+
+```
+$ cd $HOME # Should be the same as /home/pleroma
+$ git clone -b stable https://git.pleroma.social/pleroma/pleroma.git
+```
+
+Configure Pleroma. Note that you need a domain name at this point:
+
+```
+$ cd /home/pleroma/pleroma
+$ mix deps.get # Enter "y" when asked to install Hex
+$ mix pleroma.instance gen # You will be asked a few questions here.
+$ cp config/generated_config.exs config/prod.secret.exs
+```
+
+Since Postgres is configured, we can now initialize the database. There should
+now be a file in `config/setup_db.psql` that makes this easier. Edit it, and
+*change the password* to a password of your choice. Make sure it is secure, since
+it'll be protecting your database. As root, you can now initialize the database:
+
+```
+# cd /home/pleroma/pleroma
+# sudo -Hu postgres -g postgres psql -f config/setup_db.psql
+```
+
+Postgres allows connections from all users without a password by default. To
+fix this, edit `/var/db/postgres/data12/pg_hba.conf`. Change every `trust` to
+`password`.
+
+Once this is done, restart Postgres with:
+```
+# service postgresql restart
+```
+
+Run the database migrations.
+
+Back as the pleroma user, run the following to implement any database migrations.
+
+```
+# su -l pleroma
+$ cd /home/pleroma/pleroma
+$ MIX_ENV=prod mix ecto.migrate
+```
+
+You will need to do this whenever you update with `git pull`:
+
+## Configuring acme.sh
+
+We'll be using acme.sh in Stateless Mode for TLS certificate renewal.
+
+First, as root, allow the user `acme` to have access to the acme log file, as follows:
+
+```
+# touch /var/log/acme.sh.log
+# chown acme:acme /var/log/acme.sh.log
+# chmod 600 /var/log/acme.sh.log
+```
+
+Next, obtain your account fingerprint:
+
+```
+# sudo -Hu acme -g acme acme.sh --register-account
+```
+
+You need to add the following to your nginx configuration for the server
+running on port 80:
+
+```
+  location ~ ^/\.well-known/acme-challenge/([-_a-zA-Z0-9]+)$ {
+    default_type text/plain;
+    return 200 "$1.6fXAG9VyG0IahirPEU2ZerUtItW2DHzDzD9wZaEKpqd";
+  }
+```
+
+Replace the string after after `$1.` with your fingerprint.
+
+Start nginx:
+
+```
+# service nginx start
+```
+
+It should now be possible to issue a cert (replace `example.com`
+with your domain name):
+
+```
+# sudo -Hu acme -g acme acme.sh --issue -d example.com --stateless
+```
+
+Let's add auto-renewal to `/etc/crontab`
+(replace `example.com` with your domain):
+
+```
+/usr/local/bin/sudo -Hu acme -g acme /usr/local/sbin/acme.sh -r -d example.com --stateless
+```
+
+### Configuring nginx
+
+FreeBSD's default nginx configuration does not contain an include directive, which is
+typically used for multiple sites. Therefore, you will need to first create the required
+directory as follows:
+
+
+```
+# mkdir -p /usr/local/etc/nginx/sites-available
+```
+
+Next, add an `include` directive to `/usr/local/etc/nginx/nginx.conf`, within the `http {}`
+block, as follows:
+
+
+```
+http {
+...
+	include /usr/local/etc/nginx/sites-available/*;
+}
+```
+
+As root, copy `/home/pleroma/pleroma/installation/pleroma.nginx` to
+`/usr/local/etc/nginx/sites-available/pleroma.nginx`.
+
+Edit the defaults of `/usr/local/etc/nginx/sites-available/pleroma.nginx`:
+
+* Change `ssl_trusted_certificate` to `/var/db/acme/certs/example.tld/example.tld.cer`.
+* Change `ssl_certificate` to `/var/db/acme/certs/example.tld/fullchain.cer`.
+* Change `ssl_certificate_key` to `/var/db/acme/certs/example.tld/example.tld.key`.
+* Change all references of `example.tld` to your instance's domain name.
+
+## Creating a startup script for Pleroma
+
+Pleroma will need to compile when it initially starts, which typically takes a longer
+period of time. Therefore, it is good practice to initially run pleroma from the
+command-line before utilizing the rc.d script. That is done as follows:
+
+```
+# su -l pleroma
+$ cd $HOME/pleroma
+$ MIX_ENV=prod mix phx.server
+```
+
+Copy the startup script to the correct location and make sure it's executable:
+
+```
+# cp /home/pleroma/pleroma/installation/freebsd/rc.d/pleroma /usr/local/etc/rc.d/pleroma
+# chmod +x /usr/local/etc/rc.d/pleroma
+```
+
+Update the `/etc/rc.conf` and start pleroma with the following commands:
+
+```
+# sysrc pleroma_enable=YES
+# service pleroma start
+```
+
+#### Create your first user
+
+If your instance is up and running, you can create your first user with administrative rights with the following task:
+
+```shell
+sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
+```
+## Conclusion
+
+Restart nginx with `# service nginx restart` and you should be up and running.
+
+Make sure your time is in sync, or other instances will receive your posts with
+incorrect timestamps. You should have ntpd running.
+
+## Questions
+
+Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.
diff --git a/docs/installation/further_reading.include b/docs/installation/further_reading.include
new file mode 100644
index 000000000..46752c722
--- /dev/null
+++ b/docs/installation/further_reading.include
@@ -0,0 +1,5 @@
+* [How Federation Works/Why is my Federated Timeline empty?](https://blog.soykaf.com/post/how-federation-works/)
+* [Backup your instance](../administration/backup.md)
+* [Updating your instance](../administration/updating.md)
+* [Hardening your instance](../configuration/hardening.md)
+* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
diff --git a/docs/installation/gentoo_en.md b/docs/installation/gentoo_en.md
index 1e61373cc..5a676380c 100644
--- a/docs/installation/gentoo_en.md
+++ b/docs/installation/gentoo_en.md
@@ -28,6 +28,7 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
 * `dev-db/postgresql`
 * `dev-lang/elixir`
 * `dev-vcs/git`
+* `dev-util/cmake`
 
 #### Optional ebuilds used in this guide
 
@@ -46,7 +47,7 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
 * Emerge all required the required and suggested software in one go:
 
 ```shell
- # emerge --ask dev-db/postgresql dev-lang/elixir dev-vcs/git www-servers/nginx app-crypt/certbot app-crypt/certbot-nginx
+ # emerge --ask dev-db/postgresql dev-lang/elixir dev-vcs/git www-servers/nginx app-crypt/certbot app-crypt/certbot-nginx dev-util/cmake
 ```
 
 If you would not like to install the optional packages, remove them from this line. 
@@ -283,10 +284,7 @@ If you opted to allow sudo for the `pleroma` user but would like to remove the a
 
 #### Further reading
 
-* [Backup your instance](../administration/backup.md)
-* [Hardening your instance](../configuration/hardening.md)
-* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)
+{! backend/installation/further_reading.include !}
 
 ## Questions
 
diff --git a/docs/installation/migrating_from_source_otp_en.md b/docs/installation/migrating_from_source_otp_en.md
index 31c2f1294..d303a6daf 100644
--- a/docs/installation/migrating_from_source_otp_en.md
+++ b/docs/installation/migrating_from_source_otp_en.md
@@ -8,13 +8,15 @@ You will be running commands as root. If you aren't root already, please elevate
 
 The system needs to have `curl` and `unzip` installed for downloading and unpacking release builds.
 
-```sh tab="Alpine"
-apk add curl unzip
-```
+=== "Alpine"
+    ```sh
+    apk add curl unzip
+    ```
 
-```sh tab="Debian/Ubuntu"
-apt install curl unzip
-```
+=== "Debian/Ubuntu"
+    ```sh
+    apt install curl unzip
+    ```
 
 ## Moving content out of the application directory
 When using OTP releases the application directory changes with every version so it would be a bother to keep content there (and also dangerous unless `--no-rm` option is used when updating). Fortunately almost all paths in Pleroma are configurable, so it is possible to move them out of there.
@@ -110,27 +112,29 @@ OTP releases have different service files than from-source installs so they need
 
 **Warning:** The service files assume pleroma user's home directory is `/opt/pleroma`, please make sure all paths fit your installation.
 
-```sh tab="Alpine"
-# Copy the service into a proper directory
-cp -f ~pleroma/installation/init.d/pleroma /etc/init.d/pleroma
+=== "Alpine"
+    ```sh
+    # Copy the service into a proper directory
+    cp -f ~pleroma/installation/init.d/pleroma /etc/init.d/pleroma
 
-# Start pleroma
-rc-service pleroma start
-```
+    # Start pleroma
+    rc-service pleroma start
+    ```
 
-```sh tab="Debian/Ubuntu"
-# Copy the service into a proper directory
-cp ~pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
+=== "Debian/Ubuntu"
+    ```sh
+    # Copy the service into a proper directory
+    cp ~pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
 
-# Reload service files
-systemctl daemon-reload
+    # Reload service files
+    systemctl daemon-reload
 
-# Reenable pleroma to start on boot
-systemctl reenable pleroma
+    # Reenable pleroma to start on boot
+    systemctl reenable pleroma
 
-# Start pleroma
-systemctl start pleroma
-```
+    # Start pleroma
+    systemctl start pleroma
+    ```
 
 ## Running mix tasks
 Refer to [Running mix tasks](otp_en.md#running-mix-tasks) section from OTP release installation guide.
diff --git a/docs/installation/netbsd_en.md b/docs/installation/netbsd_en.md
index 6a922a27e..6ad0de2f6 100644
--- a/docs/installation/netbsd_en.md
+++ b/docs/installation/netbsd_en.md
@@ -19,6 +19,7 @@ databases/postgresql11-client
 databases/postgresql11-server
 devel/git-base
 devel/git-docs
+devel/cmake
 lang/elixir
 security/acmesh
 security/sudo
@@ -196,3 +197,11 @@ incorrect timestamps. You should have ntpd running.
 ## Instances running NetBSD
 
 * <https://catgirl.science>
+
+#### Further reading
+
+{! backend/installation/further_reading.include !}
+
+## Questions
+
+Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.
diff --git a/docs/installation/openbsd_en.md b/docs/installation/openbsd_en.md
index e8c5d844c..eee452845 100644
--- a/docs/installation/openbsd_en.md
+++ b/docs/installation/openbsd_en.md
@@ -14,11 +14,12 @@ The following packages need to be installed:
   * git
   * postgresql-server
   * postgresql-contrib
+  * cmake
 
 To install them, run the following command (with doas or as root):
 
 ```
-pkg_add elixir gmake ImageMagick git postgresql-server postgresql-contrib
+pkg_add elixir gmake ImageMagick git postgresql-server postgresql-contrib cmake
 ```
 
 Pleroma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt.
@@ -242,3 +243,11 @@ If your instance is up and running, you can create your first user with administ
 ```
 LC_ALL=en_US.UTF-8 MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
 ```
+
+#### Further reading
+
+{! backend/installation/further_reading.include !}
+
+## Questions
+
+Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.
diff --git a/docs/installation/openbsd_fi.md b/docs/installation/openbsd_fi.md
index 272273cff..b5b5056a9 100644
--- a/docs/installation/openbsd_fi.md
+++ b/docs/installation/openbsd_fi.md
@@ -16,7 +16,7 @@ Matrix-kanava #freenode_#pleroma:matrix.org ovat hyviä paikkoja löytää apua
 
 Asenna tarvittava ohjelmisto:
 
-`# pkg_add git elixir gmake postgresql-server-10.3 postgresql-contrib-10.3`
+`# pkg_add git elixir gmake postgresql-server-10.3 postgresql-contrib-10.3 cmake`
 
 Luo postgresql-tietokanta:
 
diff --git a/docs/installation/otp_en.md b/docs/installation/otp_en.md
index fb99af699..b7e3bb2ac 100644
--- a/docs/installation/otp_en.md
+++ b/docs/installation/otp_en.md
@@ -28,15 +28,17 @@ Other than things bundled in the OTP release Pleroma depends on:
 * nginx (could be swapped with another reverse proxy but this guide covers only it)
 * certbot (for Let's Encrypt certificates, could be swapped with another ACME client, but this guide covers only it)
 
-```sh tab="Alpine"
-echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
-apk update
-apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot
-```
-
-```sh tab="Debian/Ubuntu"
-apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
-```
+=== "Alpine"
+    ```
+    echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
+    apk update
+    apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot
+    ```
+
+=== "Debian/Ubuntu"
+    ```
+    apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
+    ```
 
 ## Setup
 ### Configuring PostgreSQL
@@ -47,31 +49,35 @@ apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
 
 RUM indexes are an alternative indexing scheme that is not included in PostgreSQL by default. You can read more about them on the [Configuration page](../configuration/cheatsheet.md#rum-indexing-for-full-text-search). They are completely optional and most of the time are not worth it, especially if you are running a single user instance (unless you absolutely need ordered search results).
 
-```sh tab="Alpine"
-apk add git build-base postgresql-dev
-git clone https://github.com/postgrespro/rum /tmp/rum
-cd /tmp/rum
-make USE_PGXS=1
-make USE_PGXS=1 install
-cd
-rm -r /tmp/rum
-```
-
-```sh tab="Debian/Ubuntu"
-# Available only on Buster/19.04
-apt install postgresql-11-rum
-```
+=== "Alpine"
+    ```
+    apk add git build-base postgresql-dev
+    git clone https://github.com/postgrespro/rum /tmp/rum
+    cd /tmp/rum
+    make USE_PGXS=1
+    make USE_PGXS=1 install
+    cd
+    rm -r /tmp/rum
+    ```
+
+=== "Debian/Ubuntu"
+    ```
+    # Available only on Buster/19.04
+    apt install postgresql-11-rum
+    ```
 
 #### (Optional) Performance configuration
-For optimal performance, you may use [PGTune](https://pgtune.leopard.in.ua), don't forget to restart postgresql after editing the configuration
+It is encouraged to check [Optimizing your PostgreSQL performance](../configuration/postgresql.md) document, for tips on PostgreSQL tuning.
 
-```sh tab="Alpine"
-rc-service postgresql restart
-```
+=== "Alpine"
+    ```
+    rc-service postgresql restart
+    ```
 
-```sh tab="Debian/Ubuntu"
-systemctl restart postgresql
-```
+=== "Debian/Ubuntu"
+    ```
+    systemctl restart postgresql
+    ```
 
 If you are using PostgreSQL 12 or higher, add this to your Ecto database configuration
 
@@ -151,14 +157,16 @@ certbot certonly --standalone --preferred-challenges http -d yourinstance.tld
 
 The location of nginx configs is dependent on the distro
 
-```sh tab="Alpine"
-cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
-```
+=== "Alpine"
+    ```
+    cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
+    ```
 
-```sh tab="Debian/Ubuntu"
-cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.conf
-ln -s /etc/nginx/sites-available/pleroma.conf /etc/nginx/sites-enabled/pleroma.conf
-```
+=== "Debian/Ubuntu"
+    ```
+    cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.conf
+    ln -s /etc/nginx/sites-available/pleroma.conf /etc/nginx/sites-enabled/pleroma.conf
+    ```
 
 If your distro does not have either of those you can append `include /etc/nginx/pleroma.conf` to the end of the http section in /etc/nginx/nginx.conf and
 ```sh
@@ -175,35 +183,39 @@ nginx -t
 ```
 #### Start nginx
 
-```sh tab="Alpine"
-rc-service nginx start
-```
+=== "Alpine"
+    ```
+    rc-service nginx start
+    ```
 
-```sh tab="Debian/Ubuntu"
-systemctl start nginx
-```
+=== "Debian/Ubuntu"
+    ```
+    systemctl start nginx
+    ```
 
 At this point if you open your (sub)domain in a browser you should see a 502 error, that's because Pleroma is not started yet.
 
 ### Setting up a system service
 
-```sh tab="Alpine"
-# Copy the service into a proper directory
-cp /opt/pleroma/installation/init.d/pleroma /etc/init.d/pleroma
+=== "Alpine"
+    ```
+    # Copy the service into a proper directory
+    cp /opt/pleroma/installation/init.d/pleroma /etc/init.d/pleroma
 
-# Start pleroma and enable it on boot
-rc-service pleroma start
-rc-update add pleroma
-```
+    # Start pleroma and enable it on boot
+    rc-service pleroma start
+    rc-update add pleroma
+    ```
 
-```sh tab="Debian/Ubuntu"
-# Copy the service into a proper directory
-cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
+=== "Debian/Ubuntu"
+    ```
+    # Copy the service into a proper directory
+    cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
 
-# Start pleroma and enable it on boot
-systemctl start pleroma
-systemctl enable pleroma
-```
+    # Start pleroma and enable it on boot
+    systemctl start pleroma
+    systemctl enable pleroma
+    ```
 
 If everything worked, you should see Pleroma-FE when visiting your domain. If that didn't happen, try reviewing the installation steps, starting Pleroma in the foreground and seeing if there are any errrors.
 
@@ -223,43 +235,45 @@ $EDITOR path-to-nginx-config
 nginx -t
 ```
 
-```sh tab="Alpine"
-# Restart nginx
-rc-service nginx restart
+=== "Alpine"
+    ```
+    # Restart nginx
+    rc-service nginx restart
 
-# Start the cron daemon and make it start on boot
-rc-service crond start
-rc-update add crond
+    # Start the cron daemon and make it start on boot
+    rc-service crond start
+    rc-update add crond
 
-# Ensure the webroot menthod and post hook is working
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'rc-service nginx reload'
+    # Ensure the webroot menthod and post hook is working
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'rc-service nginx reload'
 
-# Add it to the daily cron
-echo '#!/bin/sh
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "rc-service nginx reload"
-' > /etc/periodic/daily/renew-pleroma-cert
-chmod +x /etc/periodic/daily/renew-pleroma-cert
+    # Add it to the daily cron
+    echo '#!/bin/sh
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "rc-service nginx reload"
+    ' > /etc/periodic/daily/renew-pleroma-cert
+    chmod +x /etc/periodic/daily/renew-pleroma-cert
 
-# If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
-run-parts --test /etc/periodic/daily
-```
+    # If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
+    run-parts --test /etc/periodic/daily
+    ```
 
-```sh tab="Debian/Ubuntu"
-# Restart nginx
-systemctl restart nginx
+=== "Debian/Ubuntu"
+    ```
+    # Restart nginx
+    systemctl restart nginx
 
-# Ensure the webroot menthod and post hook is working
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'systemctl reload nginx'
+    # Ensure the webroot menthod and post hook is working
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'systemctl reload nginx'
 
-# Add it to the daily cron
-echo '#!/bin/sh
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx"
-' > /etc/cron.daily/renew-pleroma-cert
-chmod +x /etc/cron.daily/renew-pleroma-cert
+    # Add it to the daily cron
+    echo '#!/bin/sh
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx"
+    ' > /etc/cron.daily/renew-pleroma-cert
+    chmod +x /etc/cron.daily/renew-pleroma-cert
 
-# If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
-run-parts --test /etc/cron.daily
-```
+    # If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
+    run-parts --test /etc/cron.daily
+    ```
 
 ## Create your first user and set as admin
 ```sh
@@ -270,10 +284,7 @@ This will create an account withe the username of 'joeuser' with the email addre
 
 ## Further reading
 
-* [Backup your instance](../administration/backup.md)
-* [Hardening your instance](../configuration/hardening.md)
-* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)
+{! backend/installation/further_reading.include !}
 
 ## Questions