From f07a4c844da9f0ecae5bbee1ab94be56505f26f7 Mon Sep 17 00:00:00 2001 From: Thomas Bushnell Date: Tue, 25 Feb 1997 21:28:37 +0000 Subject: Initial source --- i386/i386at/rtc.h | 137 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 i386/i386at/rtc.h (limited to 'i386/i386at/rtc.h') diff --git a/i386/i386at/rtc.h b/i386/i386at/rtc.h new file mode 100644 index 00000000..e8d19670 --- /dev/null +++ b/i386/i386at/rtc.h @@ -0,0 +1,137 @@ +/* + * Mach Operating System + * Copyright (c) 1991,1990,1989 Carnegie Mellon University + * All Rights Reserved. + * + * Permission to use, copy, modify and distribute this software and its + * documentation is hereby granted, provided that both the copyright + * notice and this permission notice appear in all copies of the + * software, derivative works or modified versions, and any portions + * thereof, and that both notices appear in supporting documentation. + * + * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" + * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR + * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. + * + * Carnegie Mellon requests users of this software to return to + * + * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU + * School of Computer Science + * Carnegie Mellon University + * Pittsburgh PA 15213-3890 + * + * any improvements or extensions that they make and grant Carnegie Mellon + * the rights to redistribute these changes. + */ +/* + Copyright 1988, 1989 by Intel Corporation, Santa Clara, California. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and +its documentation for any purpose and without fee is hereby +granted, provided that the above copyright notice appears in all +copies and that both the copyright notice and this permission notice +appear in supporting documentation, and that the name of Intel +not be used in advertising or publicity pertaining to distribution +of the software without specific, written prior permission. + +INTEL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, +IN NO EVENT SHALL INTEL BE LIABLE FOR ANY SPECIAL, INDIRECT, OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM +LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT, +NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION +WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +*/ + +#define RTC_ADDR 0x70 /* I/O port address for register select */ +#define RTC_DATA 0x71 /* I/O port address for data read/write */ + +/* + * Register A definitions + */ +#define RTC_A 0x0a /* register A address */ +#define RTC_UIP 0x80 /* Update in progress bit */ +#define RTC_DIV0 0x00 /* Time base of 4.194304 MHz */ +#define RTC_DIV1 0x10 /* Time base of 1.048576 MHz */ +#define RTC_DIV2 0x20 /* Time base of 32.768 KHz */ +#define RTC_RATE6 0x06 /* interrupt rate of 976.562 */ + +/* + * Register B definitions + */ +#define RTC_B 0x0b /* register B address */ +#define RTC_SET 0x80 /* stop updates for time set */ +#define RTC_PIE 0x40 /* Periodic interrupt enable */ +#define RTC_AIE 0x20 /* Alarm interrupt enable */ +#define RTC_UIE 0x10 /* Update ended interrupt enable */ +#define RTC_SQWE 0x08 /* Square wave enable */ +#define RTC_DM 0x04 /* Date mode, 1 = binary, 0 = BCD */ +#define RTC_HM 0x02 /* hour mode, 1 = 24 hour, 0 = 12 hour */ +#define RTC_DSE 0x01 /* Daylight savings enable */ + +/* + * Register C definitions + */ +#define RTC_C 0x0c /* register C address */ +#define RTC_IRQF 0x80 /* IRQ flag */ +#define RTC_PF 0x40 /* PF flag bit */ +#define RTC_AF 0x20 /* AF flag bit */ +#define RTC_UF 0x10 /* UF flag bit */ + +/* + * Register D definitions + */ +#define RTC_D 0x0d /* register D address */ +#define RTC_VRT 0x80 /* Valid RAM and time bit */ + +#define RTC_NREG 0x0e /* number of RTC registers */ +#define RTC_NREGP 0x0a /* number of RTC registers to set time */ + +#define RTCRTIME _IOR('c', 0x01, struct rtc_st) /* Read time from RTC */ +#define RTCSTIME _IOW('c', 0x02, struct rtc_st) /* Set time into RTC */ + +struct rtc_st { + char rtc_sec; + char rtc_asec; + char rtc_min; + char rtc_amin; + char rtc_hr; + char rtc_ahr; + char rtc_dow; + char rtc_dom; + char rtc_mon; + char rtc_yr; + char rtc_statusa; + char rtc_statusb; + char rtc_statusc; + char rtc_statusd; +}; + +/* + * this macro reads contents of real time clock to specified buffer + */ +#define load_rtc(regs) \ +{\ + register int i; \ + \ + for (i = 0; i < RTC_NREG; i++) { \ + outb(RTC_ADDR, i); \ + regs[i] = inb(RTC_DATA); \ + } \ +} + +/* + * this macro writes contents of specified buffer to real time clock + */ +#define save_rtc(regs) \ +{ \ + register int i; \ + for (i = 0; i < RTC_NREGP; i++) { \ + outb(RTC_ADDR, i); \ + outb(RTC_DATA, regs[i]);\ + } \ +} + + -- cgit v1.2.3